• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by Tribble

  1. T

    Banks Pay Microsoft Big for Securing Windows XP ATMs

    In all honesty, many banks don't really control their physical ATM's the way you would think they would. At least, not the one i work for anyway. and especially not the smaller ones. All we do is fill them and balance them. Just look at the back of your card or the front panel on your favorite...
  2. T

    i7-4770 + H100I: Something's gotta be wrong...

    I went into the bios and set the core voltage from auto to Offset - with an offset of 0.126 Temps dropped like a rock, holding under 60 with a 6 degree difference across the cores. It also stopped the auto-overclock so i'm sitting pretty at the stock clocks, which is fine with me. Once...
  3. T

    i7-4770 + H100I: Something's gotta be wrong...

    As for my H100I configuration, I am using the stock fans, in a push only config. no space to add a pull set. It is throttling up as soon as cpu load is detected and the temps drop almost instantly when i kill the FPU tests. Currently the case is open wide, It hasn't crashed once either oddly...
  4. T

    i7-4770 + H100I: Something's gotta be wrong...

    And just a few seconds of the Pure FPU test before i got scared.
  5. T

    i7-4770 + H100I: Something's gotta be wrong...

    After 12 minutes of AIDA's stability test
  6. T

    i7-4770 + H100I: Something's gotta be wrong...

    P95 was just freshly downloaded directly from their site. I've done nothing other than set the ram to XMP @ 1833 I've checked the back-plate, and it is definitely on right. I'm not increasing the voltage myself. I'll grab a copy of Aida64 here in a moment.
  7. T

    i7-4770 + H100I: Something's gotta be wrong...

    Hi all, 10+ year reader/builder here, but lost my old account.. reguardless. I have an issue with a freshly built system. Long story short, my last pc got struck by lightning, so i just put together a new system. I'm not terribly familiar with the Haswell thermal envelope, but the disparity...
See more
Back
Top