Recent content by tranle

I don't think that this test represent anything as it would be the same thing as measuring an anti-tank rocket. They need to put somebody on it like for train or cars.

I have my igpu multi-monitor enabled so that I can use Handbrake QSV encoder to do movie re-encoding.

Has anybody tried the latest bios Z170-DELUXE-ASUS-1203 ? The overclock percentage show up wrong for me (e.g. 4700Mhz == +55% for a 6700K) And the AISuite3 TPU optimizer does not give useful result

Hi, I have the Asus Z97-Deluxe and trying to figure how many SATA disk can you hook onto the ASMedia contoller. In the manual page 1-37 it shows that you have 4 SATA port SATA6G_E12 and SATA6G_E34 but I have not been able to hook it more than 2 drives. Can you have a configuration where all...

For most motherboard you need to plugin to the CPU fan (Main) first and plug you secondary fan in you CPU OPT (as in Optional). But if a fan plugged into the CPU OPT does not spin at all then it is defective. Also make sure that CPU OPT in not in a PWM mode if you do not a PWM fan (bios setting).

You can search for 'lightdims', they are selling semi-transparent tape that allow you to bring led to an acceptable brightness.

A few questions on bios. On the Asus support page: http://www.asus.com/us/Motherboards/Z97DELUXENFC_WLC/HelpDesk_Download/ The bios 1203 shows up on all the OS except Window8.1 64bit. Is it just a config error ? I have also seen that Raja has posted a bios 1204 for the PRO version. Is...

Well the graphic chip is different, so the graphic driver is different, so the rendering of font and font anti-aliasing could be different. I know that I had to adjust the ClearType differently between my nvidia card and the onboard graphic on the same display.

The problem I have is not with content on the disk, but the raid driver, Once I switch the driver to raid, leaving all the disk configured as non-raid volume. It crashes on boot because windows cannot find the raid driver. With the older type p7xx of motherboard, I could go into the device...

Question for people using the Intel Raid on this motherboard. I currently already have Win8.1 installed in AHCI mode, is there a way to switch it RAID mode without having to re-install everything ? Thanks

This is the fan: http://www.newegg.com/Product/Product.aspx?Item=N82E16835186033 I do not know how may version Arctic really makes but mine has the 4 pin connector like the last picture on newegg site.

Sorry, I mixed the fan type that I had. The one that is not working for me is: ARCTIC F12 PWM And I did some further testing and here is what I have found: - it not a bios problem I have tried both 801 and 901 and I get the same behaviour. - As I had a mixture of high speed PWM and low...

I have in total 6 fans plugged in: - 2x CPU fan: Cooljag Everflow PWM Fan - R121225BU AF those are on the CPU and CPU OPT header and are high speed PWM fan and are calibrating and working fine as PWM. - 2x DC fan: standard Antec case fan (3-pin) and are working fine in DC mode on CHA1 and CHA2...

I am currently using the Bios 901 from the ASUS site and the Fan Xpert was inside: AISuite3_Win7-8-8-1_Z97-A_SERIES_VER10079 My PWM fan that has problem is the Noctua NF-P12-1300. Xpert 3 seems to be able to control it in PWM mode to get the curve but then it get stuck at 100%. The Bios does...

A few question on the Z97-deluxe : 1- can you boot from the M.2 drive ? 2- I have PWM fan for cha3 and cha4 fan, and each time 'fan tuning' will fail to do calibration and lock them up a max speed. The only work around I found was to delete the calibration profile, switch to 'DC mode', do...