Recent content by TheFleshRocket

I've tried going up to 1.4250 in the BIOS and still had lockups. Should I risk going higher?

I've been trying to find an answer to this particular question but haven't had any luck yet, so I'm sorry if this is a repost. I have an E6300, a 965P-DS3 and 2x1GB OCZ DDR2-900 RAM. When I initially started overclocking, I raised the MCH and FSB to +0.1v. (I also set the RAM to +0.3v...

ULi chipset? Is that some offshoot of ALi? If so, no thanks. The box I'm on right now has an MSI K8N Neo3F, which is S754 with an AGP and PCI-E slot. The review of the Asrock board states that the AGP to PCI bridge used on this board removes the "performance enhancing" features of AGP...

I have hit a barrier at 245FSB with my K8N Neo3F running an Athlon64 2800+. I have it clocked at 9x245 with all voltages except vRAM (set at 2.7v) set at default and the HTT multiplier set at 3x. The RAM is two Geil DDR533 256MB sticks running synchronously. I've bumped up the NF4 voltage...

In that case, if the RAM started requiring more voltage to be stable, then it's probably the RAM that's failing? <edit> I've been running at 1T. The RAM is rated at 275MHz at 2.5-4-8-4 1T. IIRC, I did try the 2T setting and it had no effect.

When I crank up the RAM voltage on a S939 Athlon64 system, does that have any effect on the CPU, since the memory controller is built into the CPU? I've got an A64 3000+ and 2x512 Corsair DDR550 RAM on an MSI K8N Neo Platinum 2. When I first put the system together, it was happily stable at...