• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by thefivetheory

  1. T

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Nice! If you don't mind, how are your temps/noise levels? I'm thinking of getting an FTW and was hoping to find a way to get the PCIE cables to work.
  2. T

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Ah, right. I wasn't even thinking of the power connectors... shoot.
  3. T

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Sorry if asked/answered. I know the EVGA FTW cards traditionally haven't fit, but looking at the 1080 FTW's specs, EVGA specifies the following measurements: Height: 5.064in - 128.631mm Length: 10.5in - 266.7mm This seems pretty "small" for a bigger PCB (980 Ti Classified was nearly 6" x 11")...
  4. T

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    No need to apologize, just wanted to confirm.
  5. T

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    It fits more or less fine. This is my current setup: http://imgur.com/a/eNARG -- it's a 980 Ti Hybrid (DIY version) and an H55 on my 3570K. However, I'm going to be replacing the H55 with an NH-U9S; it might just be my H55 but it starts "clicking" after it's run for a while. It's also fairly...
  6. T

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Doesn't the NH-U9S have no RAM height restrictions due to it fitting completely within in the "all-clear" zone?
  7. T

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Well that didn't work either, video is still intermittent... I guess I'm going to have to pull everything from the case and confirm it works that way and then go from there... so weird.
  8. T

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    That's a good idea, thanks. I should have thought of that. Hopefully that does the trick. Basically it's as if the plane of the port is a few mm further inside the case than it should be.. I have a V1 and this just started recently but I can't put my finger on when or what I might have done to...
  9. T

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Has anyone had an issue with the PCIE slots in the case where a GPU screws into place fine, but the bracket isn't actually flush with the outside slot, thereby causing issues with connectors not fully inserting into the ports? Trying to figure out how to resolve this...
  10. T

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Awesome, thanks!!
  11. T

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Nice setup -- quick question about the H55: did you have to do anything non-standard to mount it with the narrow ILM socket on the X99E-ITX/ac? I know that mobo comes with a "water cooler bracket" or something, but it's square. Does the H55's mounting bracket have hole placement that just works...
  12. T

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    I would think it'd fit. The pictures seems to suggest the reservoir is the depth of the fan + rad, but overall (I'm guessing, but still) it seems to be close to the same depth you'd experience with a traditional rad + fan combo. EDIT: I of course mean fit with an SFX PSU in the standard...
  13. T

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    It's perhaps less economical but you can buy a silver panel set + silver non-ODD top from ncases.com. Just food for thought in case you weren't aware.
  14. T

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    These are OC numbers but are also at 4K. I think 3440x1440 should run fairly well. http://anandtech.com/show/9306/the-nvidia-geforce-gtx-980-ti-review/17
  15. T

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Same resolution here. Good thing the 980Ti was announced today! Titan X performance (or at least incredibly close) for 2/3 the price.
See more
Back
Top