• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by The Snail

  1. T

    Half-Life/Half-Life 2 Tribute

    Thanks for all the comments. Progress has slowed down latly because i have had to work about every day. but hopfully i can finish painting the power up module and make the panel to go on it.
  2. T

    Half-Life/Half-Life 2 Tribute

    I am about half way through painting the front panel primer and some dry brushing base coats some dry brushing started and full base coat on metal plates that have been partly punched with a rubber mallot and a countersink punch this section is about finish dry...
  3. T

    External watercooling box project

    you did an amazing job on the paint good work i cant wait to see it finished
  4. T

    Half-Life/Half-Life 2 Tribute

    it is all made out of bondo and the middle is a rim to a model car it just matched the center of the power up module
  5. T

    Half-Life/Half-Life 2 Tribute

    more progress though i have the under part of the powerup module and almost complete. Removed from teh mold uncleaned test fit of add ons add on out of the mold the refind version this is a close to finished picture the under part. i will still need to do a final...
  6. T

    Half-Life/Half-Life 2 Tribute

    couldn't sleep so i decided to continue working. i've filled all the molds with bondo and all but the main chunk are free from the molds. main chunk isnt drying very fast so will have to wait till tommorrow to do that.
  7. T

    Half-Life/Half-Life 2 Tribute

    Accually we are going to add styrene to the panels to add more depth so we didnt do a final cleanup on it. i forgot to metion that i use plater of paris bandages to make the mold of teh foam. i then fill the molds with bondo to make a stronger form.
  8. T

    Half-Life/Half-Life 2 Tribute

    I started taking pictures part way into working on the power up module. this is the foam mold with some detail peices added the center of triangler piece aboce the glowing cilander will become the power botton The peice added will have an LED lighting up the center...
  9. T

    Case Cleaning Solutions

    accually it all evaporates almost imediatly and then it has nothing to burn. but you could wipe it down after worlds with a wet rag.
  10. T

    Half-Life/Half-Life 2 Tribute

    This is a joint effort between me and flow207. We originally started this design in April but we put it off until a friend came to us and ask for a Half-Life/Half-Life 2 case. Are plans are to put a floating HL Logo on the left side panel. We are then going to put bullet holes on the plexi...
  11. T

    Case Cleaning Solutions

    Belive it or not Zippo lighter fluid works wonders for removing adhesive residue from tape. althought there is the smell for about 15 minutes but it does go away pretty quick
  12. T

    Spray Paint

    we can buy spry paint by the case in the small town of huron south dakota
  13. T

    Sanding

    it is sticky and cleans off small particles you should be able to find them at most hardware stores
See more
Back
Top