Recent content by Swiss Miss

they can do it on the basis that it's the "effective" speed, but nothing reports effective speed. annoying, i know. pm redbeard about it if REALLY bothers you ;)

just look for buffered ram with micron D9GMH or D9GKX if possible. both should be able to do ddr2-533 if not DDR2-667 at 3-3-3 with relative ease

hahaha, too bad i can do something like re-running 1m to get that much of a time difference :p :D edit: dammit, i need to learn to log out and log back in... and stop hijacking my gf's account :p

go to hotornot.com sorry. had to :p for installing a heatsink, this is what i do: 1. clean both surfaces with 99% isopropyl alcohol 2. small dab of as5/ceramique in the center of the ihs 3. mount heatsink 4. world domination!

did you actually read it? it's quite amusing :D

it should work well for your purposes :)

stealing this from mark's site.. might wanna have a look at the timings he used for 2.5-2-2 ;)

they actually announced this? show me :p

that's why the heatspreaders are there though.. makes it a lot harder to break the core, and with the backplate, the mobo won't warp like those silly lga775 boards do with the stock heatsink :(

i love you markie! congrats sweetheart!

eclipse's is getting there.. :eek: :( :p

the g.skill hz actually are pretty good. the corsair is as well, but i think that on average, those g.skill will win an overclocking contest, since corsair puts the best ic's into the 6400C3 and 8500C5

i have a feeling that most of the pc6400 kits can do 450mhz, if not, at least pretty close :)

the g.skill pc6400 HZ is good stuff.. g.skill recently started putting micron chips in them, i'm pretty sure it's D9GMH.. should be capable of breaking 500mhz with the right fine tuning ;) keep in mind that you can get a pretty good overclock out of the conroe and run the ram at 1:1 with...

sounds like the biostar needs a bit of tweaking. is there dust in the slots? got the lastest bios? the spd is being read properly?