How to I set the SSD as a "non member" drive? When I created the Raid I just selected the 2 HDDs. Is this correct?
Everything else I understand.
Thank you, Mike
Hello,
I am trying to install windows 7 on a 40gb Intel SSD for the boot and a few apps and then make a RAID 1 with 2 320gb seagates. The problem is I installed windows 7 on the ssd(only 7.87gb free) and Cant seem to get the RAID to be recognized.
I have a p6x58d-e. I set the storage...
Hello, I am building a computer for my boss.
So far:
MOBO: Asus Px58d-e
CPU: i7 950
GPU: ATI firePro 4800
PSU: Corsair 650
Ram: G.SKILL Ripjaws Series 12GB
Case: Coolermaster elite 430 or Coolermaster 690(openbox)
CPU COOLER: XIGMATEK Dark Knight or CM 212
My...
Thanks!
Its been 2 years since I last built a computer and after reading so much info your brain just starts going crazy. I did find a 5850 toxic for 325.
So I am looking into building my second computer and have decided on some of these parts. the computer will be used for rendering, autoCAD, Revit, Sketchup, Photoshop, lots of file conversions and such... Also gaming of course.
I will be attempting to OC the i7 to 4GHz
Let me know what you...
so after playing around I can not get any 3.0 to be stable under prime. but I did end up getting 2.8 stable... ran prime95 for 3 hours and no errors
2.800GHz
8x 350
2.00D
DDR +.25 @ 2.0***(dont remember exactly)
FSB +.1
Gmch +.1
CPU-z vcore @ 1.328v
idle... 36,30,32,34
load...
What scares me is under that it hit 63 degrees, Given its like low 80's high 70's today and we have the windows open. I might try 400 and see what happenes... I am just getting kinda flustered with this. It seems alot of q6600 runs stable for alot less voltage then mine :(.
So it seems my cpu likes the high voltages...:(
3.00Ghz
8x 375
pcie 100
2.00D
5.5.5.19
Dram +.25v
mch +.1
GTL 1 +3%
vcore 1.4bios 1.39CPU-z
Rand prime95 for 10 minutes(yes i know it's not long enough) but I came back with zero error. Longest I have been able to run it.
Dropped...
So when i am failing prime95 its because of the round error " .4 expected but got .5" or somthing like that. Or the screen gos blank or the system resets...
So From reading a little bit, This rounding error is caused my the timings of the ram. I have OCZ platinum 1066 and my timings are...
So I might not be on here till monday... I was edging the grass and ummm... I kinda hit the cable cord going into the house :(. I dont know why it wasn't buried more than a 1/4" under ground... Oh wait yeah I do... STUPID COMCAST!!!! So I am just using someone's wireless right now and its very...
So at 8x__380___2.00D___+.2ram___+.1mch__5.5.5.15
Vcore set at 1.4...... cpu-z said 1.39
It ran and temps at idle were 37,31,32,35
Ran prime 95....core 0 failed then system rebooted.... ran for about 1 minute or so
core0 just got up to about 52. the rest were lower