Recent content by Stallion

Great.... Thanks for the input. Stallion

I am getting about a 10-14 deg c difference in temps when running Orthos and TAT. I want to push this chip more but TAT shows me at 62-63 deg c when loading cores. My temps are 48-52 deg c when loading cores via Orthos. Is TAT overkill? Thanks, Stallion

Hi Domingo, Here's a great guide that I used for my first OC... http://www.hardforum.com/showthread.php?t=1114516&highlight=Penultimate+User+Guide+Overclocking+Conroe Here's another... http://forumz.tomshardware.com/hardware/Core2Duo-Overclocking-Guide-v1-ftopict197995.html Good...

This has been a great learning experience... thanks to all your help and expertise. Here's where I am at... 3244MHz 360.47 Bus x 9 bios set 1.4v vcore SPD still enabled (1:1; running at 360.5MHz; Cas#Latency = 5; Ras#toCas#Delay 6; Ras# Precharge 6; Cycle time (tras) 18; Bank cycle time...

After dropping ram voltage back to 1.9v and FSB to 333, was stable again. Bumped up cpu voltage by .05v to 1.35v and went back to 345Mhz FSB. Orthos ran stable for about 1 hour and will run overnight. So far so good. Stallion

Orthos did fail again after about 15 minutes at 345MHz FSB (w/ 1.95v for RAM). I dropped ram voltage back to 1.9v and bus speed to 335MHz. I already ran Orthos for 12 hours with no errors, but 2 sessions of Superpi 32m fail.... I get a "Not convergent in sqr05" error.

sure... http://www.newegg.com/Product/Product.asp?Item=N82E16820145590

In cpuz, the "memory" tab has 345.5MHz (1:1). The "SPD" tab shows two tables. The first states only 270MHz (4-4-4-13) while the second states 400MHz (5-5-5-18). Without changing any RAM timings I bumped the memory voltage from 1.9v to 1.95v and was able to run Orthos longer without errors...

Arcygenical, My RAM is rated for 5-5-5-12. In CPUz it states: Cas#latency = 5 Ras# to Cas# Delay = 6 Ras# Precharge = 6 Cycle Time (tras) = 18 Bank Cycle Time (trc) = 24 Sorry for the noob question, but which settings should I lower by 1? By the way, thanks for your "The...

Thanks for the input guys... Whiskey29, the Vcore has not been changed in the bios (set to Auto) Stallion

Here's what I have and where I am at... Asus P5W DH Deluxe Corsair XMS2 2x1GB DDR2 800 (PC2 6400) Intel Core 2 Due E6600 X1950XTX 512MB Thermalright XP90 (AS5) 650 Watt BFG PSU Locked PCIe = 100mhz Locked PCI = 33.33mhz RAM 1:1 @ mfg recommended 1.9v Bus speed = 335.4 MHz x 9.0...