Recent content by SSuk

Different than 3m riser will not fit into those holes in case. 3m riser has screw holes more distant on both sides than other regular cables. Approx 10mm on each side. But you can go to your local hw store and ask them to make small metal stripe with 4 holes in it. 2 for case and 2 for new cable.

I have managed to bent the PSU cable different way - see red line below. Than you can install 40mm Noctua fan there (see my post above) PS: Koukám že tu je někdo další z česka

As maybe some of you noticed, I had issue with PCI-e extension cable. After contacting Dan, he managed that very fast. When I was waiting for the new one, I had bought some regular PCI-e extension and I have tried adding 4x Noctua 40mm fan on the top cover and to do a small adjustments to my...

I would go for Asus z370i - it has m.2 slot on front = better cooling for ssd (see my tested temp results above). As galletabah mentioned in posts above, he has overheating issues with m.2 ssd on back. Asrock Fatal1ty has its m.2 slot on back. Thats the reason why to choose asus imho.

I just made another test: Crystaldiscmark 5 9 cycles, 8 GiB test size Max temp was 54°C

I have asus z270i and i have m.2 ssd 960pro in front slot. Temps never went above 80°C (in benchmark) with added heatsinks: In idle I have about 40°C. RASPBERRY Pi RB-Heatsink But I have also 2 noctua fans above taking the heat out of the case, so it makes a difference too.

Yeah, it wont, but its a main feature of the case. If you don´t want to use it, then second possibility would be C4-SFX. You basically keep it SFX, but just A4 has changed to C4. So its like SFX series, but there will be 2 models (A4 & C4). In this situation, you can create more models in...

Yes, I had the overheating issues too. There is basically no air flow, so I didn´t use it in the end. Can you be more specific? I have also managed to install 4x 40mm noctua fan in the case. If you are interested, I can post a pictures.

As Vlad502 mentioned, C4-AIO looks as best name for me for obvious reasons.

dondan I sent the RMA email last week, but no response so far? Should I wait more? Thanks for any info.

Sent, thank you.

Sooooo, this just happened to me:

That means, that Dan printed your shipment information (label with address) along with others and he is in process of marking the packages (cases) with that DHL printed shipment information (label). When he has enough packages prepared and labelled, DHL will pick them up at once. I had it the...

Sooo, did anyone try using this: Dynatron K129 + Noctua A9x14? I have not seen this kind of "combo" yet.

So i just tried to change cooler on CPU. Heatsink is for both cases from Cryoric C7. Full load with HeavyLoad for 15 minutes. Room temperature: 21C C7 fan: idle: 35-38C, Full-load: 75-78C Noctua A9x14: idle: 38-43C, Full-load: 76-80C I will stay with Noctua now, because it is significantly...