• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by ssolotko

  1. S

    ABIT NF-M2 NVIEW RAM TIMINGS/OC POSTING

    Look, if you arent' into NF-M2 nView, then you don't have to read this, and you don't have to post. For those of us who are, and have already had some fun tweaking, we may very well wish to pursue this topic. Who made you the thought police? I thought this was the internet, land of diversity...
  2. S

    ABIT NF-M2 NVIEW RAM TIMINGS/OC POSTING

    Since the ABIT NF-M2 nView has a host of OC and RAM timing settings it would be a great resource to have a posting section for BIOS screenshots and settings for RAM settings and OC. I will post mine this weekend - I am focused on RAM timing optimization and will post my successes.
  3. S

    ram not working on abit NF-M2.. can I up the voltage?

    Hi 47, Check out the discussion below. http://www.hardforum.com/showthread.php?t=1121528&highlight=NF-M2 Short answer is there are a lot of timing settings and you might find some fruit in modifying these per the detailed RAM spec from OCZ. I doubt upping voltage is the right place to...
  4. S

    NF-M2 won't successfully reboot after changing settings

    I have the exciting conclusion as promised.... BIOS properly detected DDR2 800. This particular RAM can function at DDR2 667 CAS 5 @ 1.8V or DDR2 800 CAS 4 @ 2V. BIOS set voltage at 1.8 and likely a few settings in between. So, following the spirit of ABIT FAE advice (i.e. it's a RAM...
  5. S

    NF-M2 won't successfully reboot after changing settings

    Here is ABIT's reply - looks like BIOS may fail to detect proper RAM voltage - will check and attempt to move to 2V and let you know how it turns out. Dear Valued customer: Please clear the cmos by jumper onboard.(unplug power cord, remove the ccoms1 jumper from 1&2 to 2&3 position for 1...
  6. S

    NF-M2 won't successfully reboot after changing settings

    I am not convinced it is a RAM issue - I will repost when I test with other RAM monday PM.
  7. S

    NF-M2 won't successfully reboot after changing settings

    Sorry, posting like a n00b - not likley a PS - I have 600W. Better config data below. My first thought is RAM issues, but I don't understand the mechanism by which the BIOS Utility runs and stores data while the PC is on well enough. ABIT NF-M2 nView 4600+ WD 250GB SATA Caviar HyperX...
  8. S

    NF-M2 won't successfully reboot after changing settings

    Thanks for asking - ABIT NF-M2 nView.
  9. S

    NF-M2 won't successfully reboot after changing settings

    I have a similar problem and was curious if there was a resolution - I just emailed abit tech support so when they post I will provide their response. My new NF-M2 will not save changes to CMOS. Any attempt to save CMOS changes results in failure to reboot and requires clearing CMOS. vis. the...
See more
Back
Top