Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
Just wanted to chime in here....
I have my old 5.1 amp sitting here. It was in the middle of being repaired years ago, using what was lying around, so it has heatsinks everywhere. The BASH module area (with the large coils) received new FETs, and the power supply received a couple resistors...
Yes, I'd looked at it more closely after I posted...it had looked like a 2.1 with internal sub connection. It also seems the more I look, the more I find that even repaired amps die again, or that these amps are something of a losing battle. I could probably build an aluminum, or even wood plate...
Hi all, I was part of this thread some time ago, and started repairs on my own gifted dead Promedia 5.1 set. It's been a couple years, and I've forgotten most of what I needed to repair it.
I remember replacing the FETs on the digital converter (BASH section) and a dead resistor on the power...
I have a 6970 here, and could not run dual monitors at stock speeds. RAM speeds were full, and core was 550. I would get gray/dark gray lines across the screen with just the desktop (win 7 aero), or both screens would go black on any 3D app I tried. I'd also get artifacts out of nowhere when on...
I'll pipe in here.
I have a Sapphire 6970 myself, and set up Trixx to run fan speeds near 40% for idle. It's a bit loud, but I'm not crazy from it yet. It idles around 46-48C with 38-42% fan. I'm running dual 23" 1920x1080 monitors.
I set up a profile in Trixx to force the card to idle at 350...
Why get the 965 if he's going to OC? The 955 will do the 965 speeds. Heck, I have an X3 740 that's pushing faster than a 970BE, and unlocked to a quad...cost $89. Stuff that in the board, and see what happens. Based on everywhere I've read regarding successful unlocks, you've about an 84%...
Wow, that price is going down...I paid $295 April 27th, when it debuted. Still a great price then, and I've no regrets, but this is even better. No reason to buy the X4 series IMO. The X3 will usually unlock, and the X6 series is downright mean.
If you can still find the PC Power and cooling Quad 750, it's also a very good, tough, PSU. What is your budget? A PSU is something that should never be skimped on in a build....it provides power to every piece, as well as protection. If it is weak, or breaks, it can potentially destroy...
Read the [H] review....the 750 can have a bit of ripple on the 12V rail, but is othewise good. Hardware secrets also does a similar review, and explains the design of the PSU. The 650 and 750 are both made by CWT.
It should be enough. The poster above noted the 650HX series, but for $10 less (and free shipping), you can get the 750TX, which will have a little more headroom, and should be just fine. Do you have a specific budget to meet? If not, I'd suggest the 750...a little extra potential never hurt...
This is a known issue with the 790fxa and 890fxa boards. I speak from personal experience.
The ultimate cause...the VRM heatsink doesn't sit properly flat and contact all VRM. The result, for you, is more severe than me. I just had a blistered board. MSI is NOT admitting any defects, and treats...
I'd say forego the whole instand quad thing, and try a 740 tri-core. I bought one not too long ago, for $89 (no heatsink...had one sitting around). It unlocked to a quad, and is currently running as my frag box CPU @ 3.67 Ghz on 1.38 volts. It's also a BE....so unlocked. Even if it stays a...