• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by skalada

  1. S

    Question: Napp-it (HDD Array) poor and not lineal Benchmarks results (without SSD)

    Long time without testing! :) As I explained here in my benchmarks made with Napp-it in OmniOS (without SDDs) it seemed to give problems and poor non lineal benchmark results and I started using OpenIndiana because results where better. Since I added Solid State Drives SLC for ZIL write log...
  2. S

    Question: Napp-it (HDD Array) poor and not lineal Benchmarks results (without SSD)

    ...
  3. S

    Question: Napp-it (HDD Array) poor and not lineal Benchmarks results (without SSD)

    Thanks for the help. After reading some SAS controller reports I think there is a bottleneck here, I think that I connected one of the SAS HBA to the wrong PCI Slot. And if this information from the same SAS controller reports is right, the results on the graphics I got would make...
  4. S

    Question: Napp-it (HDD Array) poor and not lineal Benchmarks results (without SSD)

    I'm using miniSAS cable, connected as the Sun Array Manuals indicate. Now I updated the testing result grafics (in the last post), with 1 and 2 miniSAS cables (one for every SAS controller in the host) I enabled the Multipath configurations of the Host (with the stmsboot -e command) and the...
  5. S

    Question: Napp-it (HDD Array) poor and not lineal Benchmarks results (without SSD)

    Thank you... No, I never saw other results before. I can not connect more tan 8 HDD to the internal controller. I was thinking and I saw that the problema could be here This SAS Controller has only 8 SAS ports and it's up to 8 HDDs when the performance stops to increase lineal while adding...
  6. S

    Question: Napp-it (HDD Array) poor and not lineal Benchmarks results (without SSD)

    Hello, here I atach the HW info and some more about configuration. I think is not a HW limitation (I dissable the Monitor before using the Benchmarks) but if i don´t, the only red display is on the Disk; Monitor: inactive Pool Cap Disk Net CPU Job And in Sytem>Stadistics I...
  7. S

    Question: Napp-it (HDD Array) poor and not lineal Benchmarks results (without SSD)

    Hello, I´m testing Napp-it over OmniOS in a 48 x 1TB HDD Array without SSDs. I created many testing disk pools (4, 20 and 40 HDD pools) with a RAID10 (striped mirror) configuration. With the optimal block size one single HDD have a performance of 76Mb/s W and about 102Mb/s R (secuencial). And...
See more
Back
Top