• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by sigpop

  1. S

    Cant get new 7970 running

    Since it was a new install, I was actually doing System Restores. I used device mgr to confirm the driver used for the gfx card. Just to be safe, I was deleting ATI and AMD folders from the hard drive and registry per some suggestions on another site.
  2. S

    Cant get new 7970 running

    I already checked voltage w a multimeter. PSU is fine.
  3. S

    Cant get new 7970 running

    I was just grasping at straws w the power supply testing. I figured that wasn't it since it ran fine with the default Windows vid drivers. I've been running it w/ both sides of the case off and the vid card isn't hot to the touch, so I ruled out heat. I tried these driver versions: 12.3...
  4. S

    Cant get new 7970 running

    I purchased a new ATI 7970 vid card. My prev one was an ATI 5850. I'm having problems getting my vid card drivers/card to work. ASROCK X58 socket 1366 mobo, intel i7 920, 12 GB ram Corsair TX750 W power supply. It has four PCIE power cables with the 6+2 pin connectors -installed a...
  5. S

    Gigabyte P965-P35 X38 overclocking and BIOS tweaking Guide

    I hacked (very literally) a hole in the side and mounted a 120 mm fan. Dual testing with Prime95 using Large FFT test had both cores at 50 deg. I can't tell what the temp on my NB chip is and haven't taken the side off to do the "skin test". I bumped the SPD up to 2.66 and left everything...
  6. S

    Gigabyte P965-P35 X38 overclocking and BIOS tweaking Guide

    Thx for all this info and for taking questions. I have an e4400 on my DS3, RAM is 2 x 1GB SupterTalent DDR2-667 PC5300 Bumped up CPU voltage one click to 1.33125V and RAM voltage +0.2 to 2.0 and get a 300x10 = 3.0 ghz overclock. I have the stock CPU HSF on it, but with AS5 instead of...
See more
Back
Top