Recent content by semyorka

  1. S

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    DrWattsOn; okwchin: My ST450SF-G V2 certainly *does* have the external cap on the 20+4 ATX power cable! I'd never noticed it until this thread, and I certainly don't recall it on any previous PSUs I've had. My M1 is running just fine with the PP05-E cables, I opened up the case to verify that...
  2. S

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    This is actually almost the exact configuration I'm building. Z87 version of the MB, same CPU heatsink, dual 120mm intakes on the bottom. I have a 92mm for back panel exhaust if needed, but I'm not sure if I'm going to install it. I'm going to be throwing four 3TB drives set up in a RAID5...
  3. S

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Just finished up the first version of my build - see imgur album here of the Scythe Big Shuriken 2 heatsink on the Asus P87-i motherboard. It's like the two were made for each other! Juuust enough clearance everywhere. I needed a long pair of needle-nose pliers to reach in and plug the case...
  4. S

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    A moment of silence, please. Let's all pour one out for #0132. Also, kinda-sorta amused at everyone reflexively blaming the USPS. Jump to conclusions much? It's very possible that the damage occurred in the Taiwan postal system, or somewhere in its 6000+ mile voyage across the Pacific...
  5. S

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    PM me when you get it - I haven't gotten any other offers yet.
  6. S

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    #0545 (Black with ODD) arrived safely in the SF Bay Area on the morning of the 27th. It's spectacular! Is anyone out there willing to sell their 3.5" drive cage? Necere/wahaha360, do you have a spare you could sell me? I'm building this as a NAS box/HTPC.
  7. S

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Ebay? For screws? Seriously? McMaster, son. Black-oxide coated stainless steel, $7.92 for 50. Plain stainless steel ones are $4.37 for 100, if you don't care about color matching.
  8. S

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    I'd disagree. The Scythe Big Shuriken fits perfectly on the Asus Z77/Z87 boards, and packs a real punch. I'm going to be using one for my N1 NAS-box build...
  9. S

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Hah, sounds like Taiwan to me...
  10. S

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Yeah, laptop ODDs are 12.7mm thick, if I recall correctly. Looking at the photos of dual 7mm SSDs within the front cover, it looks like a 15mm HDD would fit... barely.
  11. S

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    I think the "under 7mm" measurement is if you want to two drives in the dual-stacked SSD mount. A single 12mm 2.5" HDD should fit just fine inside the front case. I mean, a slimline ODD drive is already thicker than 12mm...
  12. S

    NCASE M1: a crowdfunded Mini-ITX case (updates in first post)

    Hooray! Got my order confirmation. A note to my M1 case brethren: I'm sure many of you are building a setup like this (because let's be honest, that's the setup this case is designed for), and will have an extra HDD bracket you don't need. If that's the case, and you're willing to sell it...
Back
Top