• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by schaferj

  1. S

    ZFS, adding more disks into zpool

    here's what I mean - /dev/dsk/c3t0d0 is missing. c3t1d0 is there. similarly c4t5//xxx192Dd0, and c4t5//xxx36EFd0 are also missing. How do I get these 'whole disk / LUN / d0' devices to be there? root@zappy:/export/home/admin# ls /dev/dsk/c3t* /dev/dsk/c3t0d0p0 /dev/dsk/c3t0d0s14...
  2. S

    ZFS, adding more disks into zpool

    three are missing from /dev/dsk - they show up in format. d0 devices don't exist for c3t0d0, c4t50014EE25C2D192Dd0, and c4t50014EE6006C36EFd0. the other wwn devices are synonyms for the c#t#d0 devices. root@zappy:/export/home/admin# ls /dev/dsk/*d0 /dev/dsk/c2t0d0 /dev/dsk/c3t1d0...
  3. S

    ZFS, adding more disks into zpool

    Hey hey, I want to add a spare to a pool - in this example I'll use the syspool, but the problem is the same when I try to add 'whole d0 disk / LUN' to other pools. Below, example - the pool exists, the disk shows up in format, I try to add it as a spare, but it's not in /dev/dsk, but it shows...
  4. S

    NAS with all the parts & prices - $4260 with rack

    Hey hey, Spoke with Tyan tech support. The BIOS is version 103 and does not support Ivy Bridge! (E3-1200 V2 CPUs). Two options: 1) find an older processor and reflash after POST or pry out the BIOS chip and ship it to Tyan. Problem with shipping it is that overnight back and forth will cost...
  5. S

    NAS with all the parts & prices - $4260 with rack

    Thanks for the quick reply. The beeps are just an endless stream of short beeps. The only thing hooked up is keyboard & power. No PCI cards or drives installed yet - that was my next step - to flash the m1015s & install the drives. bad mobo? Maybe it would be less $ to return the mobo for...
  6. S

    NAS with all the parts & prices - $4260 with rack

    First off, maybe I should have gone with the supermicro! I got everything assembled, the I get nothing but beeps when I power it on. This is usually a memory issue and I get the same symptoms when I pull all of the memory. I tried several memory variations and then did some more research...
  7. S

    NAS with all the parts & prices - $4260 with rack

    Ripley, Thanks for the feedback - quick thoughts: 1) purchase limits on the 3TB, so some from amazon, some from newegg. goal is a 9 drive raidz1 + a hot spare I still need to order. 2) plan to move 2TB*5 raidz1 from the N36L and use the 2TB as one replacement for degraded and one spare. 3) i...
  8. S

    NAS with all the parts & prices - $4260 with rack

    Thanks. I was leaning towards the supermicro chassis & mobo - similar to http://www.napp-it.org/napp-it/all-in-one/index_en.html And this will be a napp-it all-in-one. With reflash on the M1015s as http://www.servethehome.com/ibm-m1015-part-1-started-lsi-92208i I found good info on the...
  9. S

    NAS with all the parts & prices - $4260 with rack

    Hello, I'm replacing my microserver N36L (5*2TB raidz1 nexantastor) with a new box. I also have an N40L (5*3TB raidz1 OI napp-it) that I'm using for backups. Here are all the parts & prices that folks may find helpful. Comments welcome. Key question - am I missing anything? I'm planning...
  10. S

    Pre-ZFS Build info

    Ripley, Any 750w or so ps should work. Did you finish the build? joseph
See more
Back
Top