Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
I've had the card in posession for about a month, but considering almost all of that has been troubleshooting and waiting for the faulty parts to be replaced, I would consider it "new" as far as time actually used.
I haven't been monitoring the temperature with a program, but if crashes occur...
Already did, actually. (unless you meant the memory on the card itself)
I've already replaced 2 faulty motherboards and a pair of RAM modules on this order.
It's true that neither machine has ever passed memtest, though.
I have two identical setups and I'm 95% sure one video card is bad.
System specs:
EVGA 8800GT 512MB
2GB OCZ Reaper 800mhz DDR2
1GB Patriot 800mhz DDR2
GIGABYTE GA-M57SLI-S4 AM2
AMD Athlon X2... something or other
Anyway, whenever I load a directx application (aka a game), and...
Good thought, but nope, the jumper is correctly set.
RMA request sent to the vendor, just waiting for instructions now. If it's dead, they'll gimmie another one, if it's not somehow, I should at least get it back and can take another look at it.
Thanks for all the help.
Sorry for the double-post, but we just got done trying the system with another psu. We used a confirmed working psu from another system, and we still only get one blink on its LED, no powering up, no fans, no lights, no nothing. I'll check for a short or something when we disassemble this...
No, neither model of memory is on the official supported list. I'd test the memory on another PC - in fact, an identical one, as I'm building two identical machines for two brothers. However, THAT pc either has a DOA psu or a DOA mobo.
This is the first time I've ever had any problems with...
When any memory is in the defective slot, the system will not boot at all, only long beeps from the PC speaker.
When the defective module is alone in any slot, the same happens - no boot, long beeps.
So far it has not mattered what combination of any kind of RAM we have inserted, Memtest...
I do have an older psu that I just replaced a few weeks ago. However, in my struggles to get all the contacts out, I was dumb and pulled on the wires of a 4-pin connection instead of the plastic - yanked the wires right out of the connector.
Right now the wires are exposed beyond the sheathing...
If you can, skip the 8800GTS and get an 8800GT. Look at some comparisons between the two - the GT is cheaper and completely outperforms the GTS.
That power supply should be just fine for either, I'd think.
Just hooked up a newly assembled pc and was powering it on to get the formatting and installation of windows started. However, when I hit the power button on the case, all I get is one blink of the LED on the back of the psu. No fans start, no boot, just one blink. It does not matter if the...
Wow, thanks for the fast reply.
Looks like there was one slightly bent pin. I think I got it straightened out since I can no longer see it at a glance. When I insert the cpu now there is very slight rocking, but it is much much flatter. Does this sound safe to use or should it be 100% flat...
OK, this seems to be a pretty serious issue. I have an AMD Athlon X2 5200+ for a GIGABYTE GA-M57SLI-S4. Building two identical computers here, the first one was just fine as far as its cpu and socket went. When I tried installing the cpu into this board, however, the chip did not lie flat. It...
Thanks.
Now this is the first time I've had bad memory show up, so I just want to run my troubleshooting process by you to make sure I got fair results.
We tried booting each module of RAM alone, and discovered that one caused the computer to not boot - long beeps came from the PC speaker...