• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by Retaliation87

  1. R

    New and Improved Watercooling Sticky - Post Your Systems Here

    I have seen the Linus Tech build, I love the new finish he has on his TJ07. This really is a great water cooling case, takes a bit of modding to get semi decent cable management done though.
  2. R

    New and Improved Watercooling Sticky - Post Your Systems Here

    This is my recently built TJ07, she was a bit beat up when I got her but I think it's turned out all right. May not be as clean as some of the other builds here but I like it. Also the camera phone pics don't do it any justice either. .
  3. R

    New and Improved Watercooling Sticky - Post Your Systems Here

    Exactly, what you want to do is plan your loop to be as short and clean as possible. The only order that matters is having your reservoir right before the pump, and fed by gravity usually.
  4. R

    New and Improved Watercooling Sticky - Post Your Systems Here

    Any particular reason you decided to go res>pump>cpu>gpu>rad? Would have looked much cleaner to go res>pump>gpu>cpu>rad I reckon. Doesn't have a noticeable impact on temps either in my experience. Other than that, very nice.
  5. R

    Resolved.

    Thanks JayJapanB, it was not sleeved by me, but a guy from one of the forums I frequent over here in New Zealand. As for the reservoir I am using one of the koolance rp-452x2's with a alphacool d5 pump so it is hidden away in the 5.25 inch bays.
  6. R

    New and Improved Watercooling Sticky - Post Your Systems Here

    Pretty well, but I don't have much to compare it to as this is my first water loop. The highest temps I've seen were 45c and 50c on the GPU in furmark and on the CPU in prime95 respectively. The GPU is a 6950 with unlocked shaders at 950 on the core and 1400 on the memory, and the CPU is a 2500K...
  7. R

    New and Improved Watercooling Sticky - Post Your Systems Here

    Wow it is really hard to take good pics of a black case with a black tinted window under a desk at night with an old point and shoot digital camera from 2006 :D
  8. R

    Resolved.

    Sorry for the poor photos, it is really hard to take good pics of a black case with a black tinted window under a desk at night with an old point and shoot digital camera from 2006 :D
  9. R

    Silverstone RV04/FT04 - Back Again

    As I said I only use a bay based pump due to space constraints. I would rather have it mounted elsewhere for several reasons (noise, tube routing etc)
  10. R

    Silverstone RV04/FT04 - Back Again

    How many 5.25" bays do people even use these days? I use 4 out of the 5 that I have but my fan controller isn't needed, my optical drive was used to install windows and hasn't been touched since, and my dual bay pump res is only in there because there is nowhere else for it in the FT02
  11. R

    Silverstone RV04/FT04 - Back Again

    I have to disagree. While it obviously won't fit the 3x180 radiator that the FT02 and RV02 could fit after modding upon inspection of the pictures I have seen so far it looks as though it will easily fit the 2x180 radiator that I currently have. The 2x180 radiator is more than enough for most...
  12. R

    Silverstone RV04/FT04 - Back Again

    I don't see the door as a problem on the FT04, on the RV04 however it is quite unsightly with no sides on it like that. The amount of times I use an optical drive or even the power buttons and fan controls in my FT02 shows me that the door would hardly ever open anyway. The only thing that...
  13. R

    Silverstone RV04/FT04 - Back Again

    Am I the only one that actually likes the look of these? Depending on how the FT04 production models turn out I would love to take my watercooling gear from my FT02 into the 04. Looks like it will fit my dual 180 radiator in the front and my dual bay res/pump quite nicely. Looks to be smaller...
  14. R

    Post your "rate my cables" here

    Here's my latest build
  15. R

    The Silverstone Gallery *post your Silverstone case here*

    Here's my latest build
See more
Back
Top