Recent content by r270ba

Thanks for all your help guys!!! I will try some of these tonight and post back.... r2

should i not be getting system beeps if it is one of those components?

but what i don't understand is .... should the cpu fan actually start running when just the on/off switch is flipped on the PSU??? I thougth it would only start running when you were trying to start the computer. Also with the PSU just flipped on in the back...should the drives open (if they...

Ok I unplugged all drives, graphics card, and everything except the above....still no go...i turn the power switch to the PSU on and the green light comes on (on the mobo)...no fans or anything...then i try to turn on the power switch from the front panel...and nothing...it doesn't POST...

Should the fans start spinning as soon as I turn the on/off switch from the psu to on?

ImLazZzy, Well when I saw the the PSU connetor and the mobo connector were different I googled it....Here is the best thing I have found.... http://gear.ign.com/articles/579/579077p9.html The mobo manual also says that it should work but is "not recomended"...I am going to order a 20pin to...

oh yea and i do have the power switch connected for my front panel....(is there anyway to power it with out the front panel???)

As far as my fan goes I was talking about my Case fan would light up...the cpu fan starts to spin and stops...it is plugged into the cpu_fan port Another thing.... Like I said above...I have a 20 pin atx main connector for a 24 pin eatx onboard connector...I switched the connectors side...

I hope I am posting this in the right place.... I just built my first computer and cannot get it to power on......When I click the on/off switch on the power supply (with the power cord plugged in) my cpu fan spins, the case fan lights up, and the power supply fan lights up ONLY FOR A SPLIT...