Thank you. These are just standard cable guides you can buy at your local shop (not sure how these stores are called in English). You just have to cut them at length and used double-sided adhesive tape to stick them to the table. I used the same stuff to get rid of cables to/from electronic...
NO this is wrong. ECC will protect you from memory errors and protect you against any data corruption by halting the system upon a double parity error. ECC will save you from bad memory trashing your data.
Whoops responded to a year old thread.
This is all true but assuming that this is a home setup, is this really such an important risk?
No SLOG saves you from wearing your SSD(s) down. No ZIL gives you good performance at an increased risk that you lose some data if for some reason the machine loses power.
@WestSidaz thanks!
I'm running ZFS so RAM is a thing of concern, as opposed to any other RAID configurations.
16 GB is plenty for my purposes. The 1 GB/TB rule is only for heavy duty production servers.
Then you have multiple users and you want lots of RAM as cache. Even L2ARC on ssds.
If...
Total storage: 101 TiB
This system: 74 TiB
Case Ri-vier RV-4324-01A
PSU Seasonic Platinum 860
Motherboard Supermicro X9SCM-F
CPU Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz
RAM 16 GB
Controller Cards 3 x IBM M1015
Hard Drives 24 x HGST HDS724040ALE640 4 TB (7200RPM)
Battery Backup Units Back-UPS...
I surely see a big decrease in temperatures. Several disks would touch 45 C on a hot summer day. Now they barely touch 39 C.
-- 35 -- | -- 32 --
| 31 | 32 | 33 | 30 |
| 35 | 37 | 34 | 34 |
| 35 | 38 | 37 | 34 |
| 37 | 36 | 39 | 34 |
| 36 | 38 | 38 | 36 |
The Norco case is definitely flawed...
Well, not exact, but 134 for the disks, 50 for the system, 30 for the ups and voilla, I get abot 210 / 220 watt,
Airflow and Norco 4020:
By default, I think that the two rear exhaust fans, combined with the PSU are not able to keep up with the 5x 8 cm fans in the middle.
Therefore...
I also connected a watt meter to my ups. By itself, the UPS does 30 watt. However, the whole machine and UPS combined does 220 watt idle. No that is not european volts. However, why this big difference is beyond me. Someone's lying.
According to my UPS (APC) my Norco is pulling 130 Watt when idle, without the 20 Spinpoint F1's spinning down to sleep/idle. Considering this setup, I think this is a rather nice figure. What are others doing?
I got this info from Norco directly:
Order:
http://www.ipcdirect.net/servlet/Detail?no=131 (case)
http://www.ipcdirect.net/servlet/Detail?no=80 (shippingcost)
Or just e-mail norco themselves. They respond quickly.