Recent content by piloteer

I too have an OC issue - I have a 3850 and a 3870 together and Overdrive isn't functioning. I've added up my total wattage and it comes to way less than my Enermax Infiniti 650W so I can't see it's a power issue. Just out of interest what program are you using to overclock the cards seperately?

I have my 3850 and a new 3870 in Crossfire which work fine (nice 6000 point boost in 3DM06!) However since adding the second card and reinstalling cat 8.2s, I have been unable to overclock the cards using ATI overdrive in CCC. I can move the sliders but the accept/restore buttons remain...

Tried shoving it up to 401 and it doesn't boot. Yes I'm using a basic PCI-E card and have disabled the onboard graphics. I think it's the board not likeing the CPU. I put my E6600 in it and it will do 400+ fine??? Just seems strange the CPU will plod along happily at 3.4Ghz and 400+fsb on my...

I got the CPU up to 3.4Ghz using 1.55v on the blitz, with all other voltages at default. Using this or even higher - 1.575v on the other boards doesn't have any effect, it's like there is a wall at 330fsb on the gigabyte and 340 on the Asus P5K. Highest I can get it is 2.7Ghz as a result.

I have two supposedly good Matx boards (Asus P5K-VM and Gigabyte G33M DS2R) and an Asus Blitz Formula. Using OCZ 6400 RAM I can overclock the E1200 (800FSB) from 1.6Ghz to 3.4Ghz on the Asus blitz with a FSB of 425x8 with the ram well over 900mhz. Now I can't seem to be able to do anything...

Seems like the board doesn't like 800fsb cpus! Doh! I know I'm not being limited by the ram, I've had it to 950mhz+ on my Asus blitz, likewise the CPU I've had up to 3.4GHz using a 425FSB. Someone mentioned a couple of other boards that would be better with 800fsb CPU's so I may invest in one...

Hi all. I'm having problems clocking my G33M DS2R. I'm using an E1200 and OCZ 6400 platinum RAM. I can't seem to get passed a 330Mhz FSB. I've clocked the CPU to 2.6Ghz on this board but even if I lower the multiplier to 7x and have the CPu at 2GHz I still can't get passed 330Mhz. Now at...