• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by Pho3niX

  1. P

    ATI Radeon HD 3870 X2 Drawing

    Mmmmm....chocolatey goodness!
  2. P

    MSI Diamond Plus ((7220) Memory

    I had major issues with the beta bios too, still ran my ram in dual channel, but I think it changed my ram timings cause I lost ~600MB in sandra right off the bat. I'm sticking with the 1.0 bios till an official update comes out. Also, dunno if Kyle or anyone is reading this thread, but the...
  3. P

    MSI Diamond Plus ((7220) Memory

    Other than the board somehow trying to run the memory way out of spec....I don't know. From my sig you see im using just 2x512 corsair value ram in dual channel just fine, even OC'ed to 216mhz 2.5-3-3-8 1T.
  4. P

    dangerous voltages? plz help.

    Sorry yeah I should have mentioned that. Its an Enermax 465P-VE link here: Enermax 465P-VE I don't have easy access to a multimeter or I would test that. Thinking about upgrading power supply anyway to utilize the 24+8 connectors vs. the 20+4 that my PSU has.
  5. P

    dangerous voltages? plz help.

    Just got the rig in my sig finally hooked up and working properly today. One thing concerns me though. Looking at the MSI CoreCenter software my voltage readings are kinda high. 3.3V shows at 3.42v 5V shows at 5.51v 12V shows at 12.7V Also my vcore shows 1.4v when I have it set at...
  6. P

    Asus A8N SLI Premium, i can't boot!!

    Im pretty sure the jumper you're lookin for is the little blue one right next to the battery on the motherboard. should be 3 pins there, and the jumper is connected to 1-2, move it to 2-3 and follow the instructions in the first reply.
  7. P

    Quick Decision needed! HELP!!

    OK after changing my mind 800000 times trying to figure what kind of motherboard i want, ive got it down to two models. MSI K8N Diamond Plus DFI LP UT-DR Expert Yes I know the Expert would be better for OC'ing, and the Diamond has 2x16 PCI-E, i want to hear any arguements why I should NOT...
  8. P

    CPU Temps?

    Those temps are fine. Only need additional/better cooling if you start overclocking.
  9. P

    Best Non-SLI Nforce4 motherboard?

    Needing something to replace my sigged mobo. Looking for a socket 939 board, good for overclocking, but without SLI. I was gonna go all out on a DFI expert, but i seriously doubt I will ever buy more than one vid card, so looking to save a little on a non-sli board. Any suggestions? So far...
  10. P

    Official Team Group cronus I/A series bench report

    Yeah really....when and where will we be able to purchase these bad boys?
  11. P

    Voltage variation on AsRock 939Dual-SATA2

    That's what I figured, DFI Expert here I come.
  12. P

    Voltage variation on AsRock 939Dual-SATA2

    So this may just be me being paranoid. But I thought it might warrant a post. Currently I have my voltage set at 1.4v for the cpu in bios. When I open CPU-Z the voltage display there constantly fluctuates between 1.36 and 1.44v. One, can this much variation cause stability issues? Two...
  13. P

    Opteron 170 CCBWE 0530 TPMW - good stepping?

    just chiming in here with my result. my 0546 XPMW does 2.7 on 1.35v and stock cooling. Im pretty sure itll do more, but waiting for new motherboard. 2.8 @ 1.45v is my goal.
  14. P

    Opteron 170 w/ AsRock 939Dual-SATA2 OC'ing "issues"

    Yeah, I know about the ocw beta bioses. I tried beta2, still didnt work. Tried to flash beta1 too wouldn't even flash, gave me an incorrect file size error. I got my eyes set on a DFI SLI-DR Expert and a new PCI-E vid card. little OT but anyone know of a cheap PCI-E card that'll give me at...
  15. P

    Opteron 170 w/ AsRock 939Dual-SATA2 OC'ing "issues"

    Yeah, gonna leave it at 2.7 for now, got the ram on a /14 divisor via systool which puts the ram @ 193, 1T also. Good enough for me for now. B'day is next month...here's my list heh 2GB G'Skill PC4000 DFI Expert new vid card...dunno which yet.
See more
Back
Top