Its indeed a very difficult modification , not only one part to change but several more and that on all backplanes... it really need the right tools , i soldering over 25 years now but i haven`t done much with SMD parts , i did modificate some cpu`s that was a difficult job to and lots of risk...
You`ve done hard work on it !
well i will see if i can get some parts like transistors and resistors
seems like 49,9 ohm type http://nl.farnell.com/panasonic/era3aeb49r9v/resistor-49r9-0603-0-1-0-1w/dp/1809605
and the gate ...
hmm project seems on a death path, i dont have more ideas
if anyone can could do some input ....
I actually google around to find a way to blink led outputs by command
as some professional applications have the option to localize the server/ drive which is in error or needed maintenance
but...
Just wonder have you been able to fix the resistors voor de bleu activity leds on the backplanes ?
i dont know how far to go with it cant messure things on that.
Need to put out all the backplanes and thats a big job with all the cables lol .
For the error leds i maybe have another idea ...
indeed so such a thing as the HC 14 should be posible to add on a pcb
for me its maybe best way to cut the circuit between the red led cathode and the 470R resistor , and take the led pin with wire to my controller via a resistor , if the red led is powered by + 3,3 volt on the anode on the...
indeed option 1 wont work with the backplanes it seems even while the SAS cables has the wiring for it .
option 2 lost as well
so left is 3 , and try to use the led headers on the controller for it
i really think that many controllers work with negative output , so we need to change
the...
Many tnx Threadstone for the good work !
i have been busy with it and i could light up the red led by put the pin 8 via 4k7 resistor to + 5 volt
but i couldnt get the negative input work
my controller seems to have negative output as my homemade leds for the data activity are working well as...
I know the SAS cables are hard to bent i have one its nearly too short to reach the controller , i cut of shrink for the first 10 cm near the connectors and on that way they are much more flexible , with some care it wont hurt the cable.
Indeed the Norco fans should be far over 31db i read wrong somewere i guess
but for redunant powersupplys be prepair they using 40mm yetengines they most worse !
i have had an 1U chassis that have 40mm Delta fans ... this makes it not usable into home areas.
hmm i dont know if you get things clear but redunant PSU are 2 or more units
but they are smaller , they would fit into a standard ATX space but need another bracket to fix them to the case.
Than you can use from both PSU`s molex 4 pin cabels to the backplanes and than they are powered double...
i guess you can just use a 120 fan wall , the chassis 470 , 4220 , 4224 are just about the same , it might be nessasairy to just dril a couple holes if they are not alined but i think this is no havy job.
Also its easy to modify the wall itself , cutting extra holes if you need to.
I using now...
i am using the Noctua NH-C12P SE14 right now into the Norco 4220 and works very well
its just leaves a few mm space from the PSU but the PSU has there the airinput with fan
so i guess it wont be a problem , other mainboards might be having another layout that leaves a bit more space free...