Recent content by pabs

Outside of the used market I don't know of any US sellers. I bought from ncases.com a while back, but I think its all moved to SFFLAB now.

Corsair SF600 Platinum. The new platinum model comes with sleeved cables and a reworked fan controller (PWM). My Silverstone SFX made a weird ticking noise at idle so I grabbed an SF600 Gold at launch a few years ago before people started posting about fan issues on that PSU... I have no idea...

Getting the heat out of the case ASAP is why the bottom exhaust works, the hot air is evacuated and allowed to do its rising thing outside the case. When the bottoms fans are set as intake all the hot air coming off the radiator or GPU fins recirculates within the case and is then sucked...

Teo: I had them ramp up to 2000 RPM during the testing to see what best case temperatures I could get. xfan10: Looks like one of the M3 screws. See this post by Necere listing all included accessories. I have a McMaster Carr nearby that has some of these in varying lengths, some big box...

The fans at the bottom are friction fit between the case floor and graphics card. Mounting the fans to the bottom of the M1 will cause the tabs on the graphics card to hit the frame, they also need to be able to move slightly to be able to slot in the graphics card. Once the card is in place I...

Granted I didn't try very hard, but I couldn't get it to fit. The stock shroud hangs low and past the end of the card so it hits the front IO connector area, 2.5 vs 2.7 slot from the 1080ti STRIX I would guess. The two tab interference photos are of the front and rear GT 120mm fans. You can...

With the reports of 20XX issues I'm weary of doing anything that could jeopardize a warranty claim. Tonight I'll see if a 240mm AIO (exhaust) + rear external 92mm (intake or exhaust) will work and keep temperatures under control once the case is all closed up. If this ends up being too hot, I...

Sadly just like the EVGA bracket it appears to be soldered on. I didn't see a single screw between the bracket and heatsink.

After coming across Shottie's post on reddit, I thought my findings would be of interest here regarding fan shroud removal of the Asus Strix 2080. Details in imgur album: https://imgur.com/a/hJ0YFSR TLDR: You can't run fans as exhaust due to the wire management tabs, flipping as intake gets...