Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
Your choices are very close in performance but the Ultra 120 is rated slightly better in the test Ive seen. The Ultra comes without fans so you have some extra costs. I know people that use the Ultras with two fans this allows you to use quieter fans and keep the air flow high.
I use the...
The voltage required for any mainboard CPU is dependent in large by the quality of the components. Is the machine stable under stress testing Orthos, Prime 95 or OCCT?
If so drop the CPU volts a notch and test again. When you reach a voltage that test as non-stable bump it up a notch or...
If its really problems for you try putting filters on the intake fans and cranking up the exhaust. The object of case air flow is to have front to back or front to top airflow with no dead spots. Get that hot air out of the case asap. Increasing pressure inside the case can create warm air...
You could setup fan speed profiles in Riva. Most of the time doing email or surfing web fan is quiet but it kicks up automatically when playing games. I chose the following values for fan control. Up to 55c 60%, 56 60 =85%, over 60c =100%. Do a search on Riva Tuner guides and it details how...
Down load Riva Tuner and setup fan profiles. I have them set for below 50c fan at 60%, above 55c fan at 85%, above 60c fan at 100%. Riva also allows you to setup overclocking profiles that you launch from the system tray. Another feature is the ability to monitor GPU temp in the system tray...
Sounds like a man with a plan. Some other ideas if youre into case moding: Can you Dremel the divider to allow the CPU HSF to turn 90 degrees and blow into the exhaust fan? I cant tell from the pic is the divider removable? That would sure make it easier to mod.
I had two empty 5 ¼ bays...
The E6550 has a 7x multiplier. I had no problems at 3.33MHz (476x7) but I had to up core volts to 1.42. Currently running at 3.15MHz (450 x 7) core volts 1.37 runs sweet and cool.
Clean up the wires and get rid of that ribbon cable your memory will be much cooler. The improved airflow will get that hot air from around the CPU out of the case faster.
Temps look high to me. I guess it kind of depends on ambient. Looks like you have plenty of CPU HSF exhausting into the case exhaust, that’s a good thing.
I wonder about that lower 80mm fan, could you move it to the front of the case? It could be disrupting case air flow and...
CPU HSF blowing hot air over the northbridge into the 8800GT sounds like a problem to me. Can you add a top exhaust and reverse the CPU HSF? That would solve the problem.