Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
I'll check out the secondaries a bit later when I get some more time. I did a bit of tracing and it looks like the damaged circuit is hooked right up to the sense pin of the 6 pin power connector. Going to explore that a bit further. Tested the diodes and they are functioning correctly, also...
Resistances (In reference to ground)
8 Pin + 6 Pin
?
?
?
0.8 M Ohm
N/A
?
?
?
0.3 Ohm
0.8 M Ohm
0.3 Ohm
0.3 Ohm
N/A
0.3 Ohm
0.8 M Ohm
0.3 Ohm
The gnd and sense pins all seem good, but I am unable to get a stable reading on the 12v pins. I can measure 0v on the pins to ground, but once I...
Yeah, the 0402 has some damage. I probed the pads and they are run in parallel. Don't have any 10uF SMD caps on hand, only relatively large through hole, will have to order some.
Haven't been able to find a schematic anywhere, and only have found more detailed board info about different...
Good call on cleaning the pads.
Can't find my calipers but comparing it to the SOT23 next to it, I am thinking either 0603 or 0805
Not a reference board. It's the gigabyte 1080ti "turbo", which is apparently the same layout as their "gaming oc" but not the "aorus extreme"
Edit: Thanks for...
Hello all,
I picked up a non-functioning 1080Ti, no longer under warranty. The card has no display, the leds next to the power connectors flash briefly when first booted then go dark immediately.
I noticed that there is a tiny cap that is loose (only connected to one pad) with the larger one...