Recent content by natr89

Been wanting to add more anyway. I will double up and update when I can run some tests on 24GB. Thanks.

Still not fixed. I feel like I have tried EVERYTHING. Even the really high voltages froze on me. This is getting ridiculous. I have updated all possible drivers on my machine and I still cannot figure this out.... HELP

Its averaging 52C on a normal day. Isnt that pretty cold?

What are the negatives of doing so?

I was still having issues galore so I bumped my Vcore all the way up to 1.575 and my QPI up to 1.55. I have not had any issues and with my H100 I am running at 50C under no load/idle. Normal use is about 55-58C. When playing game it maxes at about 63-65C. Not too bad eh? How bad is it to run...

Current CPUZ settings. Does that help? http://imageshack.us/photo/my-images/842/cpuzz.png/

What are the specifics for doing this?

NOOOOOOOOOOOOOOOOOOO!!!!!!!!!!!!!!!!!!!! It just froze again, same exact issue as before. GRRRRRRRRRRRRR. I just upped the QPI to 1.425 to see if that makes a difference with a 1.45 vcore. Anything else I can try?!!? This is so damn frustrating!

Pahaha, hell no. Vcore is at 1.44 1.86 is the CPU PLL. ;)

HALLELUJAH PRAISE THE LORD. You are a saint my friend. I set the RAM to auto and uncore to auto as well as bumping up the Vcore and QPI and the PLL to 1.86 and we are golden. I set the RAM voltage manually to 1.6 (tested at 1.5 says my research). Everything looks golden. Ran an 8 iteration...

Thank you SO MUCH for this detail. I set everything to the following: CPU clock skew - 300ps CPU spread spectrum - off CPU diff amp - 800mv CPU voltage 1.4 CPU PLL - 1.84 QPI voltage - 1.35 BLCK - 200 PCIe - 105 DRAM frequency of 1203 (recommended from somewhere else even though ram is 1600 to...

Ran it for about 3 hours. No errors found.

I will run this today and see what I come up with. If something shows, I will post it. If not, I will run the prime95 and see if we freeze. Thanks!

I was afraid someone was going to say MOBO. I had issues with my first P6T and had to send it back and they ended up sending me this one that I am using now. UGH. Not cool..... Any other suggestions?

Memtest86 shows NOTHING after 2 full passes. Also absolutely NOTHING in Event Viewer other than the Kernel Power critical for me hard shutting it down to reboot and get it active again. Anyone?