• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by natethegreat

  1. N

    Edge Molding - Push on style for metal edge

    Do a search for part #8510K11 at McMaster.com it's what I use for edge trimming.
  2. N

    The Best P180 Fan Configuration

    I swapped out the stock fan in my psu for a Yate-Loon but reviews say that the starting voltage of my psu is 5.5v. I have never heard this psu ramp up it's fan so whatever rpm's a Yate-Loon spins at at 5.5v is my psu's rpm :)
  3. N

    Enermax Phoenix

    I have seen a lot of people posting on forums saying they are happy with the Chakra Looks to be the same case with a different front panel...
  4. N

    Really girly case

    Make sure to use this heatsink :D
  5. N

    Suggestion needed for P180

    Mind if I comment on my setup??? :p There is no fan installed in the front intake of my P180. If you look in between the gap in the bracket you can see the slats of the intake cover... I just use the bracket as a divider to make a wind tunnel. Without the bracket in there the intake fan...
  6. N

    The Best P180 Fan Configuration

    I just used the same rails that the optical drives get mounted with. I think I screwed the rails onto the controllers mounting bracket really tight though...
  7. N

    The Best P180 Fan Configuration

    The fan is a normal 120mm Yate-loon D12SL-12, the black stuff around the edge is push-on rubber edge trim from McMaster.com (do a search for part #8510K11) :)
  8. N

    The Best P180 Fan Configuration

    First off, how did you mount the top intake fan? Did you screw it into the case frame, or did you screw the fan into the bracket and then install it into the case? I noticed that if you don't use the bracket the clips for the dust filter will rub the fans blades when the filter is in. As far...
  9. N

    p190 vs Antec 900?

    Comparing a P190 to a 900 is like comparing Fat Bastard to Mini-Me :) I think I would rather have the P190 but not it if comes bundled with a psu...
  10. N

    A quiet case for my dad

    I want to do this to my CM Ammo
  11. N

    A quiet case for my dad

    Great advice, this will probably help more than getting a new case. Most noise that I have noticed coming from my computer is either air turbulence (from the case fans) or case vibrations (from optical and disk drives).
  12. N

    The Best P180 Fan Configuration

    I think the Nvidia chipset would melt if I didn't let that passive cooler get some air :D I have 3 different sets of fans for this case (The stock Tri-cools, a set of 4 Coolermaster Silent LED fans, and a set of 4 Yate-Loon D12SL-12's) and none of these fans made an impact on cooling when...
  13. N

    The Best P180 Fan Configuration

    No no hdd's in the upper cage as I removed the trays to mount the fan there. The lower channel is set up so that the psu fan will draw air from the front of the case and over the hdd's. MBM5 reports hdd temps at ~44 C. I tried a fan in there but it did not cool the hdd's any better.
  14. N

    The Best P180 Fan Configuration

    My P180 airflow config: Side panel off
  15. N

    looking for a QUIETTT case for the A8N-SLI deluxe...

    Gigabyte 3D Aurora
See more
Back
Top