Recent content by moto316

the cisco sg500xg-8f8t is the only switch i know of that combines 10Gbase-T and SFP+, it doesn't meet your requirements for the 16 1Gbe ports however.

Posted this in the networking subforum but I'd like to see your guys' input since I know alot of you virtualization guys are managing the core networking like me. I manage a site that has two data centers in separate buildings connected via single-mode fiber, the fiber run is less than 300...

I manage a site that has two data centers in separate buildings connected via single-mode fiber, the fiber run is less than 300 meters so latency is on par with a LAN (<1ms). We have a stretched VMware cluster spanning across those two sites backed by a NetApp metrocluster storage system...

Open up a case with VMware, I'd be interested to hear what they find

And your changing the vcpu on the golden image, powering it up and making sure its recognized, powering it down and taking a new snapshot, and using that new snapshot when you recompose correct?

Not sure why they're not showing up but the right way to do it would be to change the golden image VM's vCPUs and then recompose your linked clone pool. A wild guess as to why the extra cores aren't recognized is because the replica disk is read-only and that's where the system configuration...

I have an isolated lab set up inside of my dedicated lab at work. Right now the entire lab infrastructure is completely physically separated from the production environment. Only way in is by connecting to the specific port that is connected to the dedicated lab switch or by OpenVPN into the...

I took the ICM class through UCSC extension awhile back. Think it ran about 1300 maybe less. It was all online and there were no specific time requirements as to when you had to attend the class, they were all recorded lectures and there were weekly assignments that needed to be completed. Can't...

wouldve been nice if they gave horizon enterprise so we could play with AppVolumes too

SeanusT, thanks for your tip, on our RSA setup we were using unrestricted authentication agents, read up and saw they have restricted agents which allow you to query an AD group to permit access through the RSA authentication process. I then allowed the VDI subnet through on my palo alto rule...

And how many sockets of enterprise plus are you allotted to?

Have any of you guys deployed or managed a View environment w a Security Server in the DMZ and had users connecting from the outside to linked clone desktops on the internal network? Currently our environment is this: - Two internal connection servers, one for internal only connections and...

what would you guys recommend for a non-persistent vdi environment then? We're using system center now on our full clones but don't have anything for av protection on our non-persistent linked clones. Due to auditing requirements we're going to need something for AV on all our endpoints. I've...

Yep very quiet, one host w all the vm's listed above, the switch, access point, storage server and cable modem only draws ~260 watts. The loudest component is the storage server but even that is quiet w the 120mm fan wall.

2 x ESXi 5.5 Hosts: Supermicro X9SRH-7TF Xeon E5-2620 64GB ECC DDR3 Seasonic X-400 Platinum Fanless PSU Noctua NH-U12 Fractal Define R4 Intel quad port NIC Always on host has one 240gb SSD and 4 Crucial M4 128GB SSD's for local VM storage and 6x2TB drives in RAIDZ-2 attached to...