Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
It sounds as if there are bad sectors, not just filesystem problems (from the input/output errors), and these include the boot sector. Yuck. I'd run badblocks first (RTM, give it the wrong option and it will wipe the disk! By default it's read-only.). Badblocks will print a list of bad blocks...
It's sharper, clearer, less fuzzy, lets you see more at once, like the difference between standard TV and HDTV. It's much more obvious when you are using it yourself, not looking over someone's shoulder. It may be though that they do know what they are talking about but can't see well.
Scythe Slipstreams work very well, if you can get them cheaply. (There are several speeds from 500rpm to 1900rpm. If you have a fan controller get the fastest ones, you can turn a fan down but not up.)
Yate Loons are much cheaper if you can find them and also good.
These tests are with dual cores. I wouldn't expect such high FSBs with a Q9450 on any board, and for the same reason I wouldn't expect DDR-1200.
That said, these FSBs aren't great with a dual core.
What am I getting for my Q9450?
DFI FTW.
(DFI Lanparty UT P35-T2R specifically, but if you...
It's possible to tweak the pot in at least some PSUs to give 13+V, although this doesn't mean that you can charge a battery with it, it would still probably shut down from too much current. Also if you do this, the other voltages are likely to change and it's something I'd only do with an old AT...
There is 1 fan blowing in and 2 out of the main part of the case, which is why you are running the intake at Mid - a drive bay fan will allow the mid fan to run at Low. (ideally a 120mm fan, but then you wouldn't be able to fit both DVDs.) It could be both quieter and cooler, but check graphics...
Look at the L2 bandwidth - for write it's actually slower than main memory. Blame Everest, if your L2 was turned off you would notice. (If the system was busy while running the benchmark it would have the same effect - and even very light load like an MP3 player in the background could do it -...
UV cables and LED fans aren't a problem - I've seen mobos that come with UV cables, and getting a lots-of-fans case for a server makes sense. It's the 'high end video and audio cards' that are hard to explain away in a server... and expensive. Although I'm sure the lawyers charged enough to buy...
If the HSF was cold and the CPU was HOT - that's because the CPU wasn't making good contact with it. It's happened to me, and it probably failed to POST because it was already overheated - so it won't happen again...
Ultimate Boot CD.
This contains IIRC 3 linuxes, 3 DOSes, Novell Netware and about 100 billion hardware utilities for installing, overclocking, testing and fixing your box. So good that it is often sold for high prices on ebay to dumbasses who don't realise it's a free download.
There's also an...
Even if there's nothing wrong with the system, on some boards the CPU clock is reset
to the lowest possible speed (way below default in my case) if you press reset during POST.
Is this packaging you have it lying on anti static? Some anti static bags are conductive enough to short out a board, if any pins on the back are sticking into the plastic.
Anyone running the beast under Linux?
"Der its a monitor of course it works"...
unfortunatively I've heard about problems with a few other 30" monitors being recognised as 1280x800, and however well the scaling works I'd rather not!