• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by mello_newf

  1. M

    Lian Li PC-V359 W/C Build

    First up I cleaned the frosting off the GPU, SLI, CPU blocks. CPU was done when I purchased just gave it a polish. Wanted consistency with the clean CSQ RAM & MOBO blocks :biggrin: Shout out to Lowfat for the awesome guide LINK Second, I got the fan controller mounted on the side panel...
  2. M

    Lian Li PC-V359 W/C Build

    Been working on this off and on with a limited budget for months now. I think I have made enough progress to start posting my work log. :thumb: Hardware Case - Lian Li PC-V359 Motherboard - Asus Maximus VI Gene CPU - i7 4770 / 4790 (sourcing) RAM - 4x4GB Mushkin Redline 2133 DDR3 GPUs - SLI...
  3. M

    Advice For Overheating GPU

    Are you actually seeing the voltage jumps? They seem stable on mine but thats program readouts so you can take that for what its worth. I have found my old pair of GTX480's had about that difference in temps 8-10 when on load. But that would flip flop when changing the main gpu im outputting...
  4. M

    Advice For Overheating GPU

    Im looking to see if anyone has had a card run hot without it being a cooling issue. Would condensation damage to the PCB for example ever result in abnormal temps?
  5. M

    Advice For Overheating GPU

    Hey man thanks for the response. I have a few days till I can get new thermal pads shipped to me so im gonna play with things till then.
  6. M

    Advice For Overheating GPU

    I have tilted the case since it started acting up again and didn't see bubbles or a difference in temp. I also did it when I first set up the loop. And while I was gentle Im wondering if the block got some separation from it...
  7. M

    Advice For Overheating GPU

    @Dayaks Hey mate thanks for the response. Loop order and bridge are good 100% Parts were flushed before 680's were added CPU temp increase was expected as I over clocked it quite a bit in those benchmarks. Order of issues Went... All good - 1X GPU temp issue - All good after bleeding - 1X...
  8. M

    Advice For Overheating GPU

    Have a issue here that I haven't encountered before. After hours of fiddling I'm gonna throw up my hand and ask for help. NOTES CPU and GPU's are on water One card is running super hot idle & stress, then it was fine, then it ran even hotter... GPU = EVGA 680 X2 (1 running at 45-90C when main)...
  9. M

    [FS][CAN] Dominator & GSKill RAM - Water Cooling - GPU - MOBO

    up we go
  10. M

    [FS][CAN] Dominator & GSKill RAM - Water Cooling - GPU - MOBO

    up we go
  11. M

    [FS][CAN] Dominator & GSKill RAM - Water Cooling - GPU - MOBO

    Canada only. Prices are in CAD. Local pickup in the GTA. Please inquire about any shipping. More info below. (LOCAL PICKUP STRONGLY PREFERRED) RAM Corsair Dominator Platinum DDR3 2133 32GB 4X8GB 4 X 8GB 32GB SET = $450 (32GB set) 2 X 8GB 16GB SET = $250 (per 16GB set) CORSAIR Dominator...
  12. M

    Lian Li PC-V359

    Yeah mobo tray has about 5 screws holding it on. Few more if you want to remove the pegs at the front of the case that gives it support. Only thing that I have found to be riveted is the PSU mounts. Got them out with a flat head screwdriver without much issue but can't be reused
  13. M

    Lian Li PC-V359

    To anyone looking at this case with water cooling in mind I have just picked one up here are my initial findings. Dual 120mm Fan Mounts -Can support a slim (30mm thick) style 240 rad with 2x 20-25mm thick fans (both sides) *exceeding a total thickness of 55mm per rad will cause clearance issues...
  14. M

    Lian Li PC-V359

    Lian Li PC-V359WB Black Aluminum Micro ATX (NEWEGG) Lian-Li Global | PC-V359 (Lian-Li) Im looking into doing a rebuild using this PC-V59WB from my PC-354B case with W/C options in mind. Anyone have experience doing a build using this case? Any annoyances particularly when factoring in a...
  15. M

    [WTB] FANS, PSU, COOLER, SSD

    bump
See more
Back
Top