• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by Melamol

  1. M

    Zombie Gpu

    Ahh, that’s a bummer. I don’t have a bench power supply.
  2. M

    Zombie Gpu

    What/where exactly is the core rail? Would it be ok if I connect all 5 ground pins on the 8 pin and the 3 12V pins, then hooking up a usb Charger to it (ground and 5V) or maybe a battery is enough (not sure if the defekt component gets hot enough to visualize it Witzbold Batterie though). Also...
  3. M

    Zombie Gpu

    Oh and if I remove one fet for the 8 pin, does it automatically draw more power over Pcie, wich could blow the fet there?
  4. M

    Zombie Gpu

    Well 0.3 to 0.4, but i get the same value when I contact both pins of my multimeter. So i guess it’s in the margin of error. edit: I see now that the caps below the gpu core show 0 Ohm too. This is pretty strange. It might be, that my multimeter is just not sensitive enough and that it is fine...
  5. M

    Zombie Gpu

    No, the pads are fine now. The short is between each cap, or where the caps were. I read 0ohm between the +and - side. I marked it in the second picture.
  6. M

    Zombie Gpu

    Hey, I use a and soldering station. Small heat gun so to speak. And a tweezer, a bit Kolophonium and soldering paste. I mean between the big vin and the pig pGND on the Chip (picture below). I already desoldered all 4 Mosfets. And the resistance value from the supposed to be defekt ones are...
  7. M

    Zombie Gpu

    Ok, i have a small Problem, well looking at the Gpu market right now, might be a big problem… I jused an Rx 470 nitro+ 8Gb wich worked well, until it didn’t. One day the pc just wouldn’t recognize it anymore and fans won’t spin. Thought might be something defekt on the pin. First checkt the two...
  8. M

    About PSU and OS

    Thanks, you are confirming, what I thought to be right about the Psu. For the OS, I will try RaveOS, since it is Linux based as well as free, as long as you use the 2miners pool. If this is not working well, I will switch to Ubuntu.
  9. M

    About PSU and OS

    I know that there are several Tutorials online, but sometimes a read contradictory things and before I burn my house down I what to make sure. So here a few questions. As far as I have understood it, one has to connect riser and Gpu always with the same Psu and not riser with one and gpu with a...
See more
Back
Top