Recent content by mcschneid

  1. M

    Silverstone SST-FT03-Mini (Mini-Itx)

    As the other guys already wrote, the EVGA Signature card will not be cooled efficiently in this case. You'll need a card with a so called direct heat exhaust (DHE) - a centrifugal fan blows all the heat through the slot brackets of the graphics card. Most of the EVGA superclocked cards use such...
  2. M

    Silverstone SST-FT03-Mini (Mini-Itx)

    Not yet, just played a bit with the MSI Afterburner. But I'll try if Precision X works better...
  3. M

    Silverstone SST-FT03-Mini (Mini-Itx)

    Finally, I lost against my MSI GTX560ti Hawk graphics card and replaced it by a EVGA GTX 660 Superclocked. The direct heat exhaust works much better. Noise under Idle and average graphics load conditions are fine, but I'm not completely happy with its noise level under load. Furthermore I...
  4. M

    Silverstone SST-FT03-Mini (Mini-Itx)

    I had some issues with it and only use the USB3 ports directly at the ATX-panel of my Board right now. The problem is not related to a driver issue but to the poor USB 3.0 cables and the poor internal cable from Silverstone. I tried to copy from one USB 3.0 HDD to another USB 3.0 HDD (both 2.5"...
  5. M

    Silverstone SST-FT03-Mini (Mini-Itx)

    It seems that your Pump is Not working at all, so the water can't circulate And transport the Heat away from your CPU.
  6. M

    Silverstone SST-FT03-Mini (Mini-Itx)

    Dispite my signature I used the AP141 at reduced speed the Last Couple of weeks instead of the LEPA. I just relaced the fan Last Weekend for a try ;-)
  7. M

    Silverstone SST-FT03-Mini (Mini-Itx)

    To be honest, I never tested this in my latest config with ATX PSU. Based on WiSK, all the other members in this thread and my experience ist should be possible, but maybe a bit higher temp then 42c under load. While i'm travelling this week I will not able to test it before weekend. When I...
  8. M

    Silverstone SST-FT03-Mini (Mini-Itx)

    Scratch my nonsense about the LEPA fan that it can't handle the AIO watercooling - I mixed up something... Now I replaced the AP141 by the LEPA LPVX14P and I played a little bit with the Xpertfan tool of the Asus P8Z77-I board. The LEPA is slightly audible above 50% fan speed (800 RPM) and...
  9. M

    Silverstone SST-FT03-Mini (Mini-Itx)

    I had to learn it the hard way that a direct heat exhaust graphics card is a mandatory for the FT03 mini, but at least I had given my graphics card a try... Regarding the the AP141 fan: I reduced the voltage to 50% and could live with it (the pump of my corsair H60 is audible anyway). If you're...
  10. M

    Silverstone SST-FT03-Mini (Mini-Itx)

    75°C graphics card temp. under load sounds really good - how about the noise level? And what 660ti model have you used? I'm still struggling with my MSI GTX560ti Hawk, but the only solution is most likely to replace it by a card which needs less power (and a 660ti should consume 70~80W less in...
  11. M

    Silverstone SST-FT03-Mini (Mini-Itx)

    Hi, I'm still struggling with my MSI N560GTX-Ti Hawk graphics card and a quiet and effective cooling when FT03-Mini is closed. Currently I've to remove the front-panel because after only a few minutes of gaming (World of Tanks) temperature hits >80°C and the graphics card fans are at 100% RPM...
  12. M

    Silverstone SST-FT03-Mini (Mini-Itx)

    It seems that's not the case - I'm from Germany.
  13. M

    Silverstone SST-FT03-Mini (Mini-Itx)

    I'm on vacation the next 2 weeks, but I'll try to RMA it when I'm back and will see what happens. From my opinion it's not a big benefit to use the ST45SF-G because of the cable management - I only disconnected one line off. On the other hand the modular cables are more inflexible because of the...
  14. M

    Silverstone SST-FT03-Mini (Mini-Itx)

    Over the weekend I've done a dB measurement at home with a Voltcraft SL-300 dB measurement device and my FT03-mini with ST45SF-G PSU. Settings:I configured the dB measurement device for the range: 30~80 dBA; measurement time was set to slow=1s (optimized for continuous loudness measurements)...
  15. M

    Silverstone Modular 450W SFX (ST45SF-G) - Now has a product page - NextQ = When?

    I tried it already before and removed the side wall of my FT03-mini next to the PSU. It becomes cooler, but the fan remain at the same noise level.
Back
Top