• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by MarkJohnson

  1. M

    Need a 4 monitor supported video card.

    Thanks guys, I'll look to see if I can find one with 4 digital outputs. I already have an active display port adapter that was used in the previous 3 monitor card that went bad. Thanks again -=Mark=-
  2. M

    Can access second page of threads.

    I posted a thread in the video card forum for help on selecting a video card with support for 4 monitors and it has scrolled off the page, but I can't find a way to get to the second page, or any other page. There are only 9 posts listed per page. -=Mark=-
  3. M

    Need a 4 monitor supported video card.

    I just bought a Galaxay MDT 610 (61TGF4AM5UNX) with 4 monitor support. But it treats them as two paired monitors. AA BB Instead of A B C D Anyone know of a cheap as possible video card to support 4 monitors independently? I don't care which brand. This is mainly for office...
  4. M

    SuperMicro X9SAE/-V - Xeon IvyBridge C216 ATX

    I fixed it, I needed to set UEFI Only in the bios. It was Legacy and UEFI and it was defaulting to Legacy. I also found out you need secure boot enabled as well.
  5. M

    SuperMicro X9SAE/-V - Xeon IvyBridge C216 ATX

    I need to install windows 7 ult x64 to my system as whs2011 doesn't support wmc. Anyway, I am trying to use UEFI installation and it just wont boot for me. I thought it was my flash drive, but if I put it in my Q87 board, it boots fine. I have the latest 2.0b BIOS installed. Not sure if it...
  6. M

    Looking for a cheap upgrade for my secondary PC

    I have an HD 7750 and a GTX 650. They are roughly the same. However the 650 needs a 6-pin power connector, even though the gt 640 doesn't, and the 640 has a higher tdp. The 640=65w and the 650=64w. I just assume the extra 6-pin is for overclocking the 650? The 7750 has 55w TDP and has more...
  7. M

    SuperMicro X9SAE/-V - Xeon IvyBridge C216 ATX

    I have no verification that ECC is working 100% on the i3, but it boot and runs fine. I found out on researching ECC that it is supported by the motherboard chipset and ECC options are located in the chipset menu and not the memory menus. other than this, it's all I know. I have my...
  8. M

    SuperMicro X9SAE/-V - Xeon IvyBridge C216 ATX

    I also was able to get my Samsung 1600MHz low power non-ECC memory working, I also put in my i3-2120 in my newer X9SAE-V and my Kingston ECC memory worked. I was unable to verify if ECC was working properly or not, but it was functioning.
  9. M

    SuperMicro X9SAE/-V - Xeon IvyBridge C216 ATX

    I have the X9SAE-O with a E3-1220L V2 and 16GB (4 x 4GB) ECC ram and my system idles down to around 20-21 watts and 28-30 light use with 48-50 intelburntest. I have a Cooler Master 212 EVO cooler with no fan as this chip runs so cool, even under IBT, that it doesn't need a fan. I also have a...
  10. M

    Windows 8 Ultra Fast Boot UEFI GOP

    I'm building a low budget build and want to know which motherboards and cpu/gpu have GOP built in? I will be going Intel 1155 and wanted to know which chips will support it. I was thinking of a H61 or will that support it, or do I need a Z board, or even 7 sersies board? Same with Sandy...
  11. M

    SuperMicro X9SAE/-V - Xeon IvyBridge C216 ATX

    Well, nisnohks sent me hid BIOS, but its for the X9SAE-V board, so I'm not sure if I want to use it. After two days of email tag with Supermicro they say this is normal behavior. I'm not buying it though. I've never had a board make more than one beep when everything was fine. Anyone...
  12. M

    SuperMicro X9SAE/-V - Xeon IvyBridge C216 ATX

    I get the same info EnderW. I PMed nismohks about his 10/05 BIOS I emailed Supermicro tech support -=Mark=-
  13. M

    SuperMicro X9SAE/-V - Xeon IvyBridge C216 ATX

    My BIOS reports 2.0 in the BIOS, and has the same date as the one on the website. also, the filename suffix is 2.731 as in my bios v2 and date 7/31. I could try a reflash I guess. What version do other have? Mine info came from CPU-Z as well. It says my mpotherboard revision is 1.01A...
  14. M

    SuperMicro X9SAE/-V - Xeon IvyBridge C216 ATX

    Heck yeah, I get a short song and then a short pause and a final beep and it boots fine without issues. Not sure what it all means but there are 7+ short/long beeps then 3 very loud beeps followed by a short pause before the final OK sounding beep. my BIOS says my 4 x KVR16E11/4HC say they...
  15. M

    SuperMicro X9SAE/-V - Xeon IvyBridge C216 ATX

    Well, the board and CPU came early and got it together lastnight for a quick run with my spare Samsung 2gb ECC unbuffered stick (M391B5673FH0-CH9) from my HP Proliant Microserver and it booted right up. I installed win 7 ult last night for a quick test and it is really slow. Probably only 1...
See more
Back
Top