• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by Louse76

  1. L

    Tforce 6100 CPU Temp not reading properly and other issues...

    At first, the CPU temp was reading correctly (29-30C), now it is reading in the negatives, usually under -100C! Is this some type of a known issue? It also will not at all read the CPU temp or Motherboard temp in any monitoring applications, including the Biostar one or Everest. The version...
  2. L

    Tforce 6100 CPU Temp not reading properly and other issues...

    Anyone?
  3. L

    1.63v on air with Venice/Palermo Chips

    Dang! What chip will give you that kind of speed while undervolting?!
  4. L

    1.63v on air with Venice/Palermo Chips

    I agree with the point of diminishing returns, but I also see a lot of value in being able to run right at a point that allows memory to run at stock speeds using a divider.
  5. L

    looking for the quietest AMD 64 939 fan cooler

    I may pick up one of those from you...
  6. L

    1.63v on air with Venice/Palermo Chips

    Back in the day I bought and ran a window mount AC unit to cool my duron with the side panel off of the case, back when they were first released in socket A, ha! I'm no longer willing to pay the electric to cool it down that way though... :D
  7. L

    looking for the quietest AMD 64 939 fan cooler

    I just started using a ZALMAN CNPS7000B-CU and even with the case open on the desk right next to me I can just barely hear it. But fanless, that really is the dream. The Ninja with the 1200RPM fan sounds best.
  8. L

    1.63v on air with Venice/Palermo Chips

    I'd like to hear more thoughts on this...
  9. L

    3-pin fan Y-Adaptor ?

    Booya! :D jk :) Anyhow, if it burns out the motherboard, good riddens! :D
  10. L

    Tforce 6100 CPU Temp not reading properly and other issues...

    I finally had a little bit of time to play with the OC on this board after installing everything last night. At first, the CPU temp was reading correctly (29-30C), now it is reading in the negatives, usually under -100C! Is this some type of a known issue? Should resetting the BIOS via a...
  11. L

    Biostar Tforce overclocking stories??

    Got a little bit of time to play with the OC on this board after installing everything last night. At first, the CPU temp was reading correctly, now it is reading in the negatives, usually under -100C! Is this some type of a known issue? Should resetting the BIOS via a jumper fix it? It also...
  12. L

    Biostar Tforce overclocking stories??

    Just picked up this board refurbed, put it in my system, but haven't had a chance to fire it up. I am using the s754 version and a Sempron 3000+ that will do 2700 stable or 2673 stable with CnQ enabled. This thread is too long to sort through. I am hoping to use an FSB of 297 or 300 and...
  13. L

    3-pin fan Y-Adaptor ?

    I really doubt that there is just one overall, but rather one BESIDES the CPU. Someone go please find me a recent Mobo that has only one 3-pin connector.... good luck! :D
  14. L

    1.63v on air with Venice/Palermo Chips

    I just wanted to comment that I have run both my Palermo 3000+ and Venice 3000+ at 1.63v with no problems and good cool temps. Without CnQ, 41C idle and 50C load. The Venice is new, but the Palermo was at that for a couple of months, until I realized I could lose 3MHz on the HTT and get CnQ to...
  15. L

    Mounting bracket for AMD Retail Heatpipe

    The Arctic Cooling one that I have came with a whole plastic assembly. Too bad you already ordered that, or I'd hook you up.
See more
Back
Top