Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
Back on topic :)
With the Perc connected, 4 X sata harddisk and 1 ssd the Device, the device i use to check the power consumption now shows.
Hours : 5
kW: 0,41
0,82w pr hour (and i know that i can't say that, but don't know the right term. But i think most know what i mean)
Think i will just...
New update :)
The system have now been running with 1 SSD and 4 sata harddisks for 18 hours and used 0,95kW, which average 53w pr hour.
The 2 extra sata harddisks have added 2w pr hour like they should, which was the same as the first 2.
Just connected the Perc 5, lets see if that is a power...
New update :)
The system have now been running with 1 SSD and 2 sata harddisks for 8 hours and used 0,41kW, which average 51w pr hour.
The 2 sata harddisks have added 2w pr hour like they should.
Just connected 2 more drives to the motherboard, so lets see in 4-8 hours :)
Read a few reviews where they said that it could be used, but it was not adviced since it was too slow/clunky. So i just assumed that they were right :)
How many vm's do you have running? Can the disk still spin down on the nas, if the vm's are running?
Just a small update :)
The system have now been running with 1 SSD disk for 17 hours and used 0,83kW, which average 49W pr hour.
Will connect 2 Sata drives to the motherboard and see how it works out.
Peanuthead@ i do actually have a synology DS412+ but always thought it was too slow for...
I updates the bios and checked the settings, seems ok. Power technology is set to Efficient at the moment.
It is now running with 1 ssd drive with esxi booted from usb and with 1 VM running. I'll let it run until tomorrow and check the Time/kWat.
Thanks for all the replies so far :)
Bios Settings:
Intel Hyper Threading = Enabled
Active Processor Cores = All
Turno Boost = Enabled
Power Technology = Energy Efficient - If i chance it to custom, then i can set EIST and Cstate+Pstate
Custom:
Eist = Enabled
Pstate = HW_ALL
CPU C3 = Disabled
CPU C6 = Enabled
Package C state limit...
I disconnected the perc and all the harddisks, connected a 80gb Intel X-25 SSD and moved the Server2008 (which is my main vm). Lets see the results of that.
@Faugusztin:
No Perc but 4 X harddisk = 100W
No Perc but 2 X harddisk = 97W
Something is really wrong
@shnelson
The psu is a 80Plus (was...
Thanks for the reply :)
I had a gut feeling that the drives were messing up the power consumption. Might have to test the drives individually to see what is going on. I know it will mess up the raid10, but it will be worth it in the long run.
The motherboard is really nice and i love the IPMI...