• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by leonardslurr

  1. L

    Knocked PCI card out accidentally - now no post

    That's a boot sequence issue though, not a POST issue. That I would've figured out :p
  2. L

    Knocked PCI card out accidentally - now no post

    Alright I just spent another hour on it- cleared the CMOS and tried a PS/2 keyboard. But as it turns out the problem wasn't caused by the dislodging at all, but an apparently faulty portable HDD that is, I'm guessing, drawing too much power. It's a WD Passport 120gb that I borrowed yesterday...
  3. L

    Knocked PCI card out accidentally - now no post

    One other thing to add- The computer remained on after the PCI card got pulled, and appeared to work normally, other than the audio. I shut it down to reseat the card and when I booted it back up, the above is the result. I just pulled all the ram and video to see if the LED diagnostics...
  4. L

    Knocked PCI card out accidentally - now no post

    It's not really that surprising but it's still sucks. Anyone have any ideas? The board is a DFI LanParty NF4 Ultra-D, and after reading the manual and looking at the "Diagnostic LEDs" that I thought would be helpful, I'm no further along. The last LED does not go off, meaning the "System...
  5. L

    3-monitor cloning with an Eyefinity card - anyone?

    There's nothing actually wrong with the projector, I don't think. It's just a matter of forcing cloning that isn't so picky about matching frequency or something. It definitely can't be replaced because they don't make TVs anywhere near this size, and it's about $5000 worth of equipment that has...
  6. L

    3-monitor cloning with an Eyefinity card - anyone?

    Has anyone used an eyefinity card to clone 3 monitors? For a project I recently picked up a Powercolor 5750 with 2x DVI, 1x DP and 1x HDMI. I figured out that 3 outputs could be used if one of them was DisplayPort. I didn't have any DP monitors, but with an active converter I have all 3...
See more
Back
Top