• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by leeghoofd

  1. L

    My H50 vs. H70 Test

    Kinda intrigued by your testing Sonda, did you also test the stock setups ? I'm getting far better results with the H70 vs H50 dual fan setup... I didn't test 4 fans as it ruins the concept of the design.
  2. L

    Water cooling choices

    Site is mirrored at i4memory.com : http://martinsliquidlab.com/
  3. L

    n00b at WC'ing

    Just do 2 loops mate (if you really need to cool them GPU's) , forget about the TEC...
  4. L

    n00b at WC'ing

    Would love to see the finished project but with all them loops it's really gonna be hard to ever change anything in that case and boy will it be stuffed... So you think you will not have enough GPU power with eg just 2 GTX 285's... no need then to watercool them... Secondly an Antec spotcool...
  5. L

    Water cooling choices

    Have a look at my review mate, I did some quick tests with the QX9650 and the I7 so you have an idea from where the WC starts to shine... Swiftech Ultima kit review At 4ghz I got a difference of around 7°C between the Swiftech kit and a True cooler (I must say that this QX9560 was a real...
  6. L

    Another 920 OC Help Thread... don't kill me

    Get off the 20 multi , run 19 multi with 200 BClock : this results in better performance for ya ram ( you can run it at 1600 mhz now) and ya cpu will require less volts then with the 20 multi... Set QPI clock at 1.36 for 200Bclock With my 920 on the Gb UD5 3.9Ghz 20 x 190 : requiring...
  7. L

    920 OC help, hoping to push it further

    Get off the 20 multi mate, try 200 x 19 and you will see that you can run it at a way lower voltage then 20 x 190... it's weird but it's like that For 200Bclock I use 1.36 QPI and run ya ram nice at 1600mhz...
  8. L

    Swiftech-H20-220-Apex-Ultima

    I did a review on the kit with an I920... early results looking good, 1366 block roundup is next Apex Ultima kit reviewed
  9. L

    The Official P45 Asus P5Q Motherboard Thread

    Till the day you get a bad flash and then you will prolly not like that program anymore :D
  10. L

    Can't overclock E2180. Processor limitation or mobo settings?

    Many of these CPU's have a FSB wall near 400-420 but that would mean you do a 100% OC (if ya keep ya multi at stock ofcourse) My CPU didn't do much with added voltage... I did E2140@3.2Ghz
  11. L

    680i nb/sb chipset coolers

    I added the thermalright kit to my Striker board... still going strong at 450FSB with the E8400...
  12. L

    The Official P45 Asus P5Q Motherboard Thread

    1.28NB daily for 500FSB with 4GB... nothing more is required
  13. L

    The Official P45 Asus P5Q Motherboard Thread

    Indeed LLC disabled on that 600FSB 32MB Pi run just to see if the board did it with 1200Mhz ram ... loaded it was around 1.45ish level I found this out : 400FSB / ram at 800 : lowest bootable Power level : 9 400FSB/ ram at 1000Mhz : lowest bootable Power level : 7 400FSB/ ram at 1066Mhz...
  14. L

    The Official P45 Asus P5Q Motherboard Thread

  15. L

    which p45 mobo to buy

    Never achieved 500FSB on my QX9650 with X38, P5Q Dlx P45 it's a breeze, so easy to setup and the new Biosses 0702 and 0704 make this puppy fly... Most P45 boards need some tinkering in the bios to gain some RAM speed (Perf level is 1-2 higher than most good P35 mobo's) but the easy clocking...
See more
Back
Top