Recent content by Jon S

Gea, Did you try a remote CD/DVD ISO via the Supermicro IPMI Virtual Media to install OmniOS ? - Jon

I have a similar issue I've been cross flashing IBM M1015 cards for quite while (never any issues) for use in X3550 M3 servers. Hit an odd quirk flashed a new system all looked well BUT only bays 0,2,3 work and the work great but any time I put anything in bay 1, I get errors almost identical...

Okay 1) you are running a "Asus P6T6 WS Revolution" which has qty 2 Realtek 8111C 10/100/1000Mbp NICs and 2) you also tried a "HP NC360T which is the Intel PRO/1000" NIC and had the same results. Both these NICs max out at 1000Mbps (that is bits per second) so even without any overhead the...

Seems like http://www.nexenta.org/boards/1/topics/3300 shows that the IBM SeveRAID M1015 (if flashed to LSI 2008 IT mode) with 8 x Samsung HD103SJ (stoage pool, 2x RAIDZ-1) on a Supemico H8SCM-F mobo is working without issues.

Part 2 of 2 On another note .. Why I am contacting you is that I am very interested in running IBM M1015 HBAs on my illumos / openindiana systems and it seems like choose to flash e.g. http://hardforum.com/showpost.php?p=1037929117&postcount=125 Also on...

Part 1 of 2 Hi, I read your posting concerning you rig a) Supermicro X9SCM-F motherboard and b) 3 IBM M1015 cards. Running Openindiana I have been doing a lot of work on the X9SCA-F oi_148b and oi_151a specifically for 1. Bug # 1333 (illumos) and developed both work /etc/system...

After unclerunkle verified things a bit (refer to) http://hardforum.com/showpost.php?p=1037190898&postcount=47 I built a Supermicro X9SCA-F ( Intel® C204 PCH Chipset) system it works fantastic in OpenIndiana oi_148b, no undetected items on the "device driver utility" test. Note this MOBO...

Thanks much unclerunkle Your verification of the X9SCM-F / OpenIndiana compatibility tipped the scales for me. However rather than a Supermicro X9SCM-F (micro ATX), I will buy a similar Supermicro X9SCA-F (full ATX) board as I think it would work even better out of the box with...

Hi, I am planning to run a 24GB or 32GB RAM OpenIndiana with ZFS sever at oi_148b or perhaps oi_151 loaded right on the bare hardware (no EXSi or vSphere). WRT C202/204/206 chipset has anyone had success with Openindina (b148b or above) or Solaris (SE11) is running on any motherboard (I...

Hi, WRT C202/204/206 chipset has anyone had success with Openindina (b148b or above) or Solaris (SE11) is running on any motherboard (I am not interested in running on top of EXSi or vSphere). ref: http://hardforum.com/showpost.php?p=1037159787&postcount=415