In the GeForce line only the following models are AGP8X and have dual-link DVI: 7300GT, 7600GT and 7600GS.
Source: http://en.wikipedia.org/wiki/Comparison_of_NVIDIA_Graphics_Processing_Units.
Today I received my second LP3065 so I can now compare them side by side. Both have been manufactured during week 43 of 2006 and have EDID V1.3.
Visually the color calibration is nearly identical.
This will simplify Windows calibration that applies the SAME calibration LUT to ALL monitors...
From what I've read on the web Windows XP supports the use of different calibrations on different monitors ONLY through the use of their Color Profile applet. Normally Windows simply copies the profiles on both monitors as can be seen using the regular Windows Display panel.
The monitors...
Here's what I received so far:
- from HP tech support: nothing
- from Portrait Displays, the makers of the HP Display Assistant:
We do indeed make the Display Assistant software for HP. However it will only support the monitors that ship with software.
The LP3065 is not one of the...
OK after quite of bit of snooping around this is what I understand:
- the LP3065 does support DDC/CI (via pins 6&7 of the DVI dual-link)
- there's a utility from HP called HP Display Assistant (DA) to control displays via DDC/CI
- DA does support the LP2065
- the LP3065 is NOT listed as...
I am aware of this manufacturer-specific capability (BTW I have owned several Eizo, then Nanao, monitors but without this feature) but the DCC referred in the HP litt is the regular VESA one going through the DVI link (pins 6&7): ...VESA DDC standard for plug-and-play setup requires a DVI-D...
When I bought the Monaco the other choice (then slightly inferior) was the Crystal Eyes. It seems to have evolved more rapidly than the Monaco. I do not see a link to a (free) evaluation version I could download and try, do you?
What makes you think that the HP LP3065 has DCC/CI-like...
Billy,
The capability to which you are referring is DDC/CI (Command Interface), not just the regular DDC that returns the EDID info. The DDC/CI displays have their own sensors which is not the case here. Also DDC uses pins 6&7 of the DVI(-DL) connectors, not the USB bus. The USB ports on...
I received my LP3065 yesterday. It looks great. No dead or stuck pixels/subpixels and absolutely no buzzing sound. I like sit o much that I've ordered a second one today. My application is 3D scientific vizualisation. My graphics adapter is an Nvidia Quadro FX 4000 (same specs as the FX...
I just came across this possible (but relatively expensive) solution to this 1:1 pixel mapping problem: http://www.blackmagic-design.com/products/hdlink/ (see also: http://www.dv411.com/hdlink.html ). I would also check www.Gefen.com and www.markertek.com for other products. Iam
I can't comment on Cable Solutions cables but my experience with Monoprice after buying dozens of cables from them is that they're very well manufactured and compete easily with other manufacturers' cables selling up to ten times more (really!). They also ship fast and sell on eBay too. Iam Nemo