• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by Hope4sun

  1. H

    Project Monolith (First WC Build)

    Thanks mate, I used Clear Blue additive, I just fired up the system and kept adding it to the fluid until I was happy, in fact I think I may have put a little too much in and its dulled it down. Thanks also Enigma422, the reason that one of the sinks in missing in the picture of the GTX was...
  2. H

    Project Monolith (First WC Build)

    Here’s a few snaps of the system in the dark, still some cables to tidy in the main area and run out of the way. Also the cables in the top of the case need sorting too. Then just got to adjust the UV's and put the LEDs into the water block on the CPU, a little carbon fibre to cover...
  3. H

    Project Monolith (First WC Build)

    Thanks guys. The water block is designed to be used with SLI, the second card i ordered was DOA, so i''ve just got the system together at the moment with one card, the Chipset block needs moving up a little, though its very tight in between the cards with the 3mm walled Tygon and clamps...
  4. H

    Project Monolith (First WC Build)

    Sorry this has been a while coming and things have progressed quite a bit too, I missed some photos along the way as I lent someone the camera. I got the graphics cards and tested the board out of the case first. One of the cards was DOA so is on its way back :( It was a little scary...
  5. H

    Project Monolith (First WC Build)

    Thanks guys :), i'll be updating shortly. I was debating the fans pulling or pushing for ages, but the front of the case looks so good when there on , guess i could just put a cathode in there, or i'll add some fans to the back of the rad too. I'll see what the temps turn out like. Update...
  6. H

    Project Monolith (First WC Build)

    I fitted the 2 Samsung Spinpoints to the rear hard disk mounting cage, because the triple radiator is going in the front of the case. There’s not much room to use the cases iCages. I managed to squeeze some rubber 'O' rings between the hard disks and the chassis and then screwed through some...
  7. H

    Project Monolith (First WC Build)

    Well after seeing the quality, time and effort people have been putting into there mad mods and creations, it hardly seems worth posting my build, but as its my first water-cooled and AMD system, I'm welcoming any feedback, etc :) I new I wanted to cool the CPU, Chipset and 2 GPU's from the...
  8. H

    Post your "rate my cables" here

    Thanks mate, just read the rules and removed the pic :o , the tags will be going trust me lol Andy
  9. H

    Post your "rate my cables" here

    Hi all, new here. I'm very impressed with some of the cabling and wished i'd found this site sooner, before i started my new project. I thought it would be good to post some pics of the cabling in a watercooled system i'm currently building. Heres all the cables that will be seen, except for...
See more
Back
Top