No, my Dram voltage is still at 2.1v. I'm debating if I should try putting the voltage back to 2.2v along with timings of 4-4-4-12. I'll probably make up my mind this weekend.
Yeah, I set my Dram voltage to 2.1v. I'm debating whether or not to try and set the memory timings back to 4-4-4-12 & 2.2v, or just stick with tweaking XP for performance boosts. Currently leaning towards just sticking with the XP tweaks.
Ran Memtest for 4+ hours tonight-no errors. Ran 2 instances of Orthos just stressing the cores for 45 minutes-no errors. I think it'll be alright to proceed with tweaking XP and installing the rest of my stuff and my sound card. Think the best way to work the machine from here out is to run...
Went to 400fsb earlier. Still the same core voltages in CPU-Z & EasyTune. PCMark score is now 7031 & 3DMark is at 4304. Ran 2 instances of Orthos using blend mode for 5 minutes-no errors reported. Coretemp is showing the chips are idling between 37-39c. Think I'll run Orthos just stressing...
Currently at 370fsb (2.59ghz). Cpu-z still showing 1.28v core, & EasyTune showing 1.31v. PCMark score is now 6664 & 3DMark is up to 4272. Core temps are still okay, but that's because I have my case's back fan cranked up and the 9700 cooler at 2250rpm, and I have a box fan pointed at the...
Well, took it up to 300fsb and so far no hiccups. Cpu-z is showing 1.28v core voltage, but EasyTune is showing 1.31v. PCMark05 gave a score of 5789, and 3DMark06 gave me a 4152 score. Ran 2 instances of Orthos for 5 minutes and neither core got above 42c. Think I'll take the FSB up another...
Overclocked the FSB to 276Mhz in Bios. Set FSB & (G) MCH OverVolt Control to +.1 each. Bios says the memory is at 5-5-5-15-I obviously forgot this earlier this morning. Just ran PCMark05 & got a score of 5548. CPU-z shows the expected settings: 1932Mhz for the CPU, and DRam/FSB frequency...
AFAIK, the 7900gs doesn't have any special functionalities or such. There is an s-video out on it, but TV output is run by the Nvdia driver. I bounced my situation by my brother, who's a bit more experienced at this stuff than I am, and he suggested my WTF PCI is a PCI bridge chip. I just did...
Well, things seem to be steady for the moment. I'm posting this from the rig now. I went ahead & disabled the floppy & IDE connectors, and nothing has blipped on the board in over a dozen re-boots. I've gone ahead and installed CrapCleaner, AVG, EasyTune, Diskeeper9Lite, and a couple of other...
Well, the re-flash to F12 went well enough when I was finally able to do it-QBios wouldn't find the file on my thumbstick so I hooked up a USB Floppy drive & it took forever to read the file, but it flashed it once it verified. Did all the Bios stuff ya suggested, BillParrish, and I installed...
Board was bought new-in-box; the cables, i/o shield & discs were untouched when I opened it, and the 775 socket cover was on it. If it was used before & then returned to the store, they did an awesome job of repackaging it. I had already disabled the onboard sound prior to installing Windows...
Well, the board just blipped and I went into Bios to check, and sure enough the CPU & DRAM are back on "auto". I tried putting just the DRAM on "manual", but it just blipped and put it back into "auto" again. I dunno what to think at this point.
Well, reinstalled XP and I still have that WTF PCI thing in Device Manager. Guess I'll just live with it for now. And I couldn't get the on-board LAN port to work for crap-installed & reinstalled drivers, plugged it directly to my DSL modem-nothing worked. It just flat-out refused to...
Danny Bui-Yeah, first thing I tried. Didn't work. Tried the driver on the CD, didn't work either.
AVT-Tried that, too. No dice. I started out with the newest drivers on Gigabyte's site. About to try re-installing XP now.