Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
Mine are linked in this thread. Good resource to compare systems. I have 4 scores listed, with single and dual 580 lightning xtremes overclocked to 940/1880/2400.
http://community.futuremark.com/forum/showthread.php?175827-FM-Members-3DMARK-Fire-Strike-List
I did a clean install after a secure erase on my ssd while I was waiting and as soon as windows update started doing updates the usb3 ports went dead again.
Well unless Asus decided to put the wrong driver on the p9x79-ws download page for win7 x64 then yes, the correct driver was installed. (download named USB3_11430)
UEFI 3401 dated 1/3/13
found the new firmware at station-drivers.
So I loaded the firmware (which detected and installed on both...
So here is a new one. I downloaded the new asmedia driver update from asus off the p9x79-ws page and about 5 minutes after loading all 3 of the usb3.0 sockets (2 rear 1 front) die and show errors in device manager. Says the driver cannot be found (39).
Can't fix by uninstalling and going to...
Usually they are built to workstation or server class specs, some carry better warranties, some have better power control for overclocking than others might, etc.
So many options it's hard to say. I use the ASUS WS boards and love them, no issues and solid oc'ers. I have used tri sli in the...
I transcode plex to 3-4 devices as well as stream to an Xbox extender, plus I run the system as an HTPC connected to my Denon 4311ci via HDMI and use MPC-HC, madVR, ReClock, and SVP.
I also have 3 optical drives that I use to rip & encode via handbrake and MakeMKV, which I open multiple...
Yes, quiet uses less power. Reference level (0db on the reciever) is attained at either 75db or 85db at your primary listening position depending on the test kit you use.
You use 1w of power @ your speakers sensitivity for volume output @ 1m. You lose 6db for every 3' distance from the...
Those errors all indicate either bad memory, an unstable memory OC or a bad memory controller.
Double check your timings in your bios as well as your voltages and make sure you are set up correctly.
The only memtest worth a shit is memtest86+ 4.20. Run it overnight. The other ones are junk.
Shows are recorded at different input levels, so they will all sound different. The same issue can be found with DVD and Bluray movies.
Working as intended. The only thing you can really do to control volume would be to go into your AVR and adjust settings depending on source material (DTS vs...