Recent content by golemcito

  1. G

    Help expand unraid and Hp N36l

    you can try this
  2. G

    HP ProLiant MicroServer owners' thread

    Hi Does anybody know if the esata port can handle port multiplication? Thanks in advance
  3. G

    HP ProLiant MicroServer owners' thread

    I have got a cuestion about this new machine. Is it mandatory change the firmware to the russian guy? Can I use the six sata in ahci mode in the new release without changing it? Thanx in advance
  4. G

    Poor Performance under raid 5

    Here we go: dd if=/dev/sdb of=/dev/null bs=8M count=1000 1000+0 registros de entrada 1000+0 registros de salida 8388608000 bytes (8,4 GB) copiados, 142,411 s, 58,9 MB/s dd if=/dev/sdc of=/dev/null bs=8M count=1000 1000+0 registros de entrada 1000+0 registros de salida 8388608000 bytes (8,4 GB)...
  5. G

    Poor Performance under raid 5

    I think i cant do that because they are working and i have 6 Tb stored...
  6. G

    Poor Performance under raid 5

    No, encryption is disabled...
  7. G

    Poor Performance under raid 5

    No. It is fine Personalities : [raid6] [raid5] [raid4] md0 : active raid5 sde[4] sdd[2] sdc[1] sdb[0] sdg[6] sdf[5] 9767566720 blocks super 1.2 level 5, 128k chunk, algorithm 2 [6/6] [UUUUUU] unused devices: <none>
  8. G

    Poor Performance under raid 5

    Hi guys I need some help. At this moment i have a 6 disks (Samsung SpinPoint F4 2Tb) RAID5 under mdadm in ubuntu. I have made some tests and I get this with hdparm: /dev/md0: Timing cached reads: 1848 MB in 2.00 seconds = 924.42 MB/sec Timing buffered disk reads: 320 MB in 3.02 seconds...
  9. G

    HP ProLiant MicroServer owners' thread

    I am waiting for you review. What are you going to do in order to solve "the alignement problem" under freenas? Thanx for your time
  10. G

    HP ProLiant MicroServer owners' thread

    Hello Are you using the internal NIC? Did you do any "tricky tunning" in order to get 90MB/sec? Thanx for your time
  11. G

    Recommendations for a Hackable NAS

    You can try this
  12. G

    Marvel AOC-SASLP-MV8 - 8 Sata PCI-E 4x non-raid controller card

    No i haven´t bought it yet. What are the better alternatives? Are those alternatives plug&play? I mean: plug the card, plug the hard disks and it is ready to launch mdadm :D Thanx in advance
  13. G

    Marvel AOC-SASLP-MV8 - 8 Sata PCI-E 4x non-raid controller card

    HeIlo I was reading the 28 pages and now i´m thinking if i should use this card in an ubuntu system using mdadm. Is there any new about the problems you found? Best Regards
Back
Top