Recent content by El_Kurgan

Hi, I'm getting this errors under autojob log Can't open perl script "/var/web-gui/data/napp-it/zfsos/15_jobs and data services/auto.pl": No such file or directory It seems that the programmed scrubs doesn't run. Will reinstall solve the missing file? (if I reinstall the settings will be...

HI, I´m getting a strange problem after updating napp-it from the last 0.500 to .600b. After every reboot I get resolv.conf empty. I've changed it with nappit and by hand without luck. there's any solution? (the system uses static ip) thanks

have you tried to disable the card bios? I had a similar problem with my 1068e + gigabyte motherboard and that was the solution

Hi, I need to move two disk from the onboard controller (amd motherboard) to my new 1068e controller. If I move them with the system off, in the next boot, the will be detected and mounted or the system needs to be resilvered? thanks

Hi. I'm trying to mount my cifs shares from mi solaris 11 in nexenta but I'm getting this error: mount_smbfs: service "svc:/network/smb/client:default" not enabled. root@backup:~# svcs -xv svc:/system/idmap:default (Native Identity Mapping Service) State: disabled since Mon Jun 20...

Hi all, can anyone explain me the differences between (and possible cause): Illegal Request Soft Errors Hard Errors Transport Errors I've found (in napp-it, under disk-controller) some disks with info like this: Illegal Request: 97 Predictive Failure Analysis: 0...

Hi all. There's any way to know why my hard disks doesn't go to sleep? The raidz is only used for storage, no logs or something like that. Here is a copy of mi power.conf autopm enable autoS3 default cpupm enable cpu-threshold 1s # Auto-Shutdown Idle(min) Start/Finish(hh:mm)...

Well, I have replaced the hard disk and seems that all the problems are gone. It was impossible to "replace" and have to detach an attach the new one. Only one more question: to resolve situattions like this.. what is the best way to resolve situations like this? There's any way to do a full...

Specs: -gigabyte ga-ma770t-ud3 -amd x4 640 -2x4gb ecc 1333 kingstone -2x80gb ide 2,5" 4200rpm (hitachi). mirroring v31 -6xsamsung 204 2tb. raidz2 v28 -lan intel gigabit pci-e 1x -vga navidia quadro pci-e 1x -power supply corsait 650w -solaris express 11 The initial post don't says...

I'll check memtest as soon I get back from work. I did a 24h test when I assembled the computer. What is more strange for me is that I check de pools status almost every day, and the two faulty drivers has appeared at the same time. It couldn't be a temperature problem. It doesn't have...

Thanks for all the info. I have set autoreplace on. How should I proceed? shutdown, put the new drive and the system will autoresilver automatically? or the disk must be detached first and use the replace command with the new drive? (both will be in the same port)

the checksums errors in the "good" drive could mean an error in the system memory or the ide controller?

the cheksum errors has increased while I was doing a scrub and copying some files to other pool: config: NAME STATE READ WRITE CKSUM rpool DEGRADED 0 0 7 mirror-0 DEGRADED 0 0 14 c8d0s0 ONLINE 0 0 14 c8d1s0 FAULTED...

Hi all, after 2 weeks from the first boot, one of the OS disks has gone: NAME STATE READ WRITE CKSUM rpool DEGRADED 0 0 4 mirror-0 DEGRADED 0 0 8 c8d0s0 ONLINE 0 0 8 c8d1s0 FAULTED...

Hi all. One question: Under user menu, by default, the only user that appears is my unix user. I add a second one without problem. Now I go to windows to configure the security in one shared folder. The second added user appears, but my "unix user" doesn't. It's normal? there's any way to...