Recent content by Eddie666

My new build with an old Lian Li Q07: here the specs: Cpu: intel XEON 1275L v3 CPU COOLER: Corsair H55 + Noctua NF-F12 PWM CASE FAN: Enermax T.B. Vegas 180mm Motherboard: Asrock ITX H81 Ram: 2x4GB crucial DDR3 Hard disk: SSD Crucal MX100 256GB PSU: FSP500-50FSPT VGA: GAINWARD GTX 1070

My new build with an old Lian Li Q07: here the specs: Cpu: intel XEON 1275L v3 CPU COOLER: Corsair H55 + Noctua NF-F12 PWM CASE FAN: Enermax T.B. Vegas 180mm Motherboard: Asrock ITX H81 Ram: 2x4GB crucial DDR3 Hard disk: SSD Crucal MX100 256GB PSU: FSP500-50FSPT VGA: GAINWARD GTX 1070

Sure, here there is cinebench: http://i.imgur.com/SR7m6y8.jpg The fan that I bought is the Silverstone SST-FW141

Hi guys. sorry for the late. during the last weekend I finally finish my pc...all seems working fine but.. I got problems with cpu temps! inside the case, with the vga placed on the heatsink I have 50° on idle and 74° in full load...and I'm not satisfied about this, cause these days are cold...

Yes sure. I'll do this evening ;) And yes, you have right, the fan is the 140 prolimatech slim

First boot out of the case (just to be sure that all works): xeon 1230l v3 asrock h81m-itx scythe kodati for the cpu 2x4gb crucial ballistx sport 1600mhz evga gtx 750 ti seems working; i install Windows 10 and did some little test; actually I was testing the cpu without a...

1cm approximately

as I said yesterday, thanks to fedex the new cpu is here! http://imgur.com/a/XwLAh now let's start thinking about the remaining hardware

yes, that is, the cpu is soldered on the mobo so, to do an upgrade, I need to replace the entire set. the new cpu should be here today (thanks to fedex)...than I will decide which model of motherboard use (probably a cheaper one....I don't need to overlock or any special features)

sorry kooky; I haven't GTAV, so I can't try....the most intensive cpu games avaible are crysis 3 and far cry 3, and they run quit (not at higher framre rate...for examples far cry 3 it's around 30fps......crysis 3 frame rate is heavely related to the maps)

Thanks man. Unfortunately, due to the nature of the motherboard I can't simply upgrade my CPU replacing with another one, so I'am going to chance the combo mono+CPU+RAM.....I'll keep the case, the VGA, the pico and the hard drive...my goals will ne the same....performances, low noise and...

Stay tuned...some serious upgrades on sight....

Yes they are right; you have to use a more powerfull brick for your config...at least a 150w (200w should be better)

Cool Man! let me know how you're temperatures will be! I suppose that you'll install the 12mm fan on the top of the case, with the airflow directed on the cooler of the cpu/gpu, right?

still surprised about the performance of this j1900 + gtx 750 ti: http://hostthenpost.org/uploads/8b5a68dd45f56ce4220618f23b654f59.jpg http://hostthenpost.org/uploads/600c4b2a13d9153f0c99bb4f0deaf675.jpg http://hostthenpost.org/uploads/4729edaeb0c057acab900d79f90149c0.jpg