drutman's latest activity

  • drutman
    Had a 41 kernel and constant reboot error and after HW swaps it was my cablemod PSU cable that was faulty.
  • drutman
    So... I am please and also confused. I have solved the issue, today. But I already had eliminated this as a possibility last week.. TL : DC (is that a thing because it is now?) ... another device was getting usb power from my powered hub...
  • drutman
    drutman replied to the thread Where are the 8K Monitors?.
    Exactly what the Red ecosystem is for PC editing and video production and with Nikon acquiring Red they should open up rental market lowering cost. Cannon has the rental market for DSLR lenses.
  • drutman
    drutman replied to the thread Where are the 8K Monitors?.
    Nice discussions here but until content is readily available, it is a no sell for me. As screens get larger the PPI drops and can look low res depending on size. Quality pixels over quantity factor, for example a 100K Christie 4K cinema...
  • drutman
    drutman reacted to elvn's post in the thread Where are the 8K Monitors? with Like Like.
    I know the 700B had dithering which affected text/clarity, but you could get it to turn off if you ran game mode with VRR active, so there was a work-around there. Thought that might be worth mentioning. The 800A has 4:4:4 chroma ~ RGB. Idk...
  • drutman
    1. Any run of cable acts like an antenna, why pros use common noise reduction or XLR jacks. RCA plugs can be a noise machine especially with cheap cables. 2. You get what you pay for, my 200 USD Logitech PC 2.1 setup has a hum issue, my...
    • 1711427407532.jpeg
  • drutman
    Scientifically the impurities are too low to worry about. Pure copper or some alloy it will eventually oxidize.
  • drutman
    drutman replied to the thread Brushed Titanium PC Cases.
    Sounds like a Caselab's quote.
  • drutman
    Not sure why folks are excited about the 512 memory bus, my 390X had it in 2015. The Fury X had 1 Tb/s HBM and it was a failure at 4K.
  • drutman
    drutman replied to the thread What is wrong with B&W speakers?.
    They tend to be revealing and with a flat freq. response they tend to be rock music unfriendly. See my post on high end audio. The Nautilus line is amazing but out of the budget. B&W bookshelf spkrs will not drive this at ref levels though...
  • drutman
    drutman reacted to dogDAbone's post in the thread Brushed Titanium PC Cases with Like Like.
    Yep, if you extrapolate that one small piece out to the amount that would be required for an average, basic ATX computer case, plus the required engineering/design work, and the milling & machining labor/time, you'd be talking ~$700-$1000, which...
  • drutman
    drutman replied to the thread Brushed Titanium PC Cases.
    Yeah i agree I am a retired Chemist and we used Monel all the time not cheap. Actually the most expensive stuff was virgin Teflon used in a custom reactor.
  • drutman
    drutman replied to the thread Brushed Titanium PC Cases.
    Not as pricy as you think...
  • drutman
    • 1710190776960.png
  • drutman
    Look up the part number on digikey site to see if there is an OEM replacement and please be careful. 140 mm Double Ball-Bearing Fan (HA1425M12B-Z) per TPU reviewer https://www.digikey.com
  • drutman
    i understand so here it is in text. Hope this helps I am a retired professional chemist with a specialty in analytical instrumentation and have a relative in the recording industry. I have knowledge of the consumer and pro side of audio. I have...
  • drutman
    If the PSU swap did not work I would swap the Cablemod set for the stock PSU cables, I had intermittent error 41 code reboots that were due to my Cablemod connector pins not making good contact within the connectors. If I touched the wiring...
  • drutman
    drutman replied to the thread New Rig Video Card help.
    Interesting comment Pend, wet/glossy is how the Crytek RT demo looks to me. Same on Cyberpunk.
  • drutman
    Why I am not concerned with Pb contamination. I characterized a brass Swagelok compression fitting that was factory cleaned by ultrasound and solvent wash. Traces of leaded cutting lubricant is still present on fitting. The ratio of leaded...
    • Bulk sample of brass fititng.jpg
    • Pb contamination of fitting.jpg
  • drutman
    1. i am more concerned with false advertising than Pb poisoning. 2. Dissimilar metals are a no no. 3. Be careful with antifreeze in your loop, I was a head Research Chemist for a govt fuel cell contract and they plumbed a lab scale industrial...
Back
Top