![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
-
Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
Recent content by DrunkenMercenary
-
D
NCASE M1: a crowdfunded Mini-ITX case (updates in first post)
Fellow enthousiasts! My ncase build is finally in a working state, but the GPU is making way too much noise for my likings. I've got a Gigabyte RTX 2080 Windforce and the temps ramp up to 76 max with the fans running at 75%. I've been looking at the cooler for a long time and came across the...- DrunkenMercenary
- Post #27,891
- Forum: Small Form Factor Systems
-
D
NCASE M1: a crowdfunded Mini-ITX case (updates in first post)
I’ve actually already managed to mount two 140mm fans bellow the gpu see my post with picture above. It’s a Gigabyte rtx 2080 windforce with two TY147’s beneath it. I’ll start with mounting my cpu cooler and all the other intake/exhaust fans and see how my overal temps will be. If needed I’ll...- DrunkenMercenary
- Post #27,801
- Forum: Small Form Factor Systems
-
D
NCASE M1: a crowdfunded Mini-ITX case (updates in first post)
Isn't cooling the VRAM's quite important? The whole issue with previous gen there were all those EVGA gpu's which had bad cooling on the VRAM which caused all of em to go dead. But the the #3 is the one to go for? I can't live with the brown noctua's! Setup I have planned is a 150mm Noctua...- DrunkenMercenary
- Post #27,798
- Forum: Small Form Factor Systems
-
D
NCASE M1: a crowdfunded Mini-ITX case (updates in first post)
Im currently thinking about getting the Arctic Accelero GPU cooler for my build. Currently under load (only tested on DOOM so far) my GPU reaches a max temp of 74 degrees . The GPU I've got is the Gigabyte RTX 2080 Windforce and I actually managed to place two Thermalright TY147's below the GPU...- DrunkenMercenary
- Post #27,795
- Forum: Small Form Factor Systems
-
D
NCASE M1: a crowdfunded Mini-ITX case (updates in first post)
Apologies, I wasn't clear at all. I've got a corsair SF450 PSU that has a really long power cable for sata stuff, I think I can attach 4 drives or something. However, the way that each power connector is connected to each other makes it impossible/hard to connect both SSD's, because the cables...- DrunkenMercenary
- Post #26,506
- Forum: Small Form Factor Systems
-
D
NCASE M1: a crowdfunded Mini-ITX case (updates in first post)
I've just picked up completing my build again with all of my (now) outdated components, but I have a few questions. 1. What do people use to power two SSD's that are mounted on the front of the case (2 ssd's on top of each other). The second question is regarding controlling all the fans in my...- DrunkenMercenary
- Post #26,501
- Forum: Small Form Factor Systems
-
D
Project Omni - Ncase M1 [Build Log]
Update 2017-02-12 Sleeving! It has a been a really long time since I've actually sleeved cables and I had completely forgotten how much work it actually is. However, the longer you're doing it the easier it becomes. When I was sleeving the last cables it was actually easy peasy. Have to say...- DrunkenMercenary
- Post #13
- Forum: Small Form Factor Systems
-
D
Project Omni - Ncase M1 [Build Log]
Sorry, don't have a lot of time and I still needed to sleeve my cables :D Sleeving is done now, so next step is actually going to be the final install.- DrunkenMercenary
- Post #12
- Forum: Small Form Factor Systems
-
D
NCASE M1: a crowdfunded Mini-ITX case (updates in first post)
Damn I still need to test my Xtreme Gaming card. I had a defect one at first too, could not even get it into the case. Hope the one I currently have is good one, if not I have to completely disassemble my rig...- DrunkenMercenary
- Post #23,025
- Forum: Small Form Factor Systems
-
D
Project Omni - Ncase M1 [Build Log]
Thanks! I'm using a Canon EOS 600D with a Sigma AF 17-70mm lens. Try to do my best making some good pictures, but I know I could still do a lot better. Also I have to work with awful lighting... Hahahaha, yeah it is freakingly big compared to the case :D In general I'm concerned about all...- DrunkenMercenary
- Post #10
- Forum: Small Form Factor Systems
-
D
NCASE M1: a crowdfunded Mini-ITX case (updates in first post)
Yeah I'm glad I took the risk to check if the card would fit! Will update this thread once the system is running :)- DrunkenMercenary
- Post #22,833
- Forum: Small Form Factor Systems
-
D
NCASE M1: a crowdfunded Mini-ITX case (updates in first post)
Decided to keep track of my Ncase M1 build on here, if interested feel free to check it out! • Ncase M1 V4 Black • Intel Core i7 6700K • Asus Z170i Pro Gaming • Gigabyte GTX 1070 Xtreme Gaming • Corsair vengeance 16GB DDR4 2133 Mhz • Samsung 850 Pro 500GB • Corsair SF450 • CPU Cooler: Noctua...- DrunkenMercenary
- Post #22,828
- Forum: Small Form Factor Systems
-
D
Project Omni - Ncase M1 [Build Log]
Update 2017-01-24 1070 Xtreme Gaming - Is it gonna fit :LOL: I have to say that this GPU is a thing of beauty. It's enormous, build quality looks and feels great and I can't wait to fire this thing up. The GPU itself weighs more that the disassembled case I think :facepalm: Hope it's gonna...- DrunkenMercenary
- Post #4
- Forum: Small Form Factor Systems
-
D
Project Omni - Ncase M1 [Build Log]
Update 2017-01-20 Initial installation Started installing the first basic easy parts onto the motherboard for this build and made some detail shots of my good looking components. Funny enough it has been a while ago that I built a PC myself, so I completely forgot that I could...- DrunkenMercenary
- Post #3
- Forum: Small Form Factor Systems
-
D
Project Omni - Ncase M1 [Build Log]
Update 2017-01-08 Updated component list, check 1st post After spending hours on different cooling possibilities in this case I have decided on going full air cooled. I think an completely air cooled system is more silent then using plug and play AIO coolers. Of course, doing a correct custom...- DrunkenMercenary
- Post #2
- Forum: Small Form Factor Systems