Recent content by dj_binlid

  1. D

    10 seconds and all is well... then kaput..

    it seems that i'd manage to keep it cool just long enough to get it in to the bios... but then kaput. good thinking though as this was exactly the problem!!
  2. D

    10 seconds and all is well... then kaput..

    GOT IT!! tried the power supply in the old rig and it all booted fine. therefore - not the psu... inpsected the mobo (after physically taking it out and removing everything except the cpu) and noticed that one of the fixing pins for the cpu was only half through the mobo. the cpu and...
  3. D

    10 seconds and all is well... then kaput..

    this is going to be my next approach as i can swap the power supply around easier without the mobo in the case. one question though - what do you mean by 'post'? i can currently get through to the point where i'd expect windows to begin to load - obviously until i reformat and re-install...
  4. D

    10 seconds and all is well... then kaput..

    just tried this suggestion and i continue to get the crash.
  5. D

    10 seconds and all is well... then kaput..

    bios revision 0401 is that enough information or do i need to provide more?
  6. D

    10 seconds and all is well... then kaput..

    the SLI mobo allows me to move to a quad core when the price reduces in the future, but the 7600GS was chosen more because it is a passive/silent card. the idea is that we can use the computer as a: - TV - games machine - general purpose - a learning experience for me... and my wife...
  7. D

    10 seconds and all is well... then kaput..

    apologies for this numpty question - how do i know what bios i have? i have the original XP disc, so if i need to re-format HD and re-load then i can do that.
  8. D

    10 seconds and all is well... then kaput..

    note - i have unplugged everything except the Hard disk - should i unplug that as well?
  9. D

    10 seconds and all is well... then kaput..

    okay. found a little speaker and plugged that in to mobo. i have also removed the wireless card and removed the TV card. i get one beep on start up. it then runs for 10s and then gives a beep and shuts down.
  10. D

    10 seconds and all is well... then kaput..

    the cpu fan is working - and plugged in to CPU_FAN on the mobo. all of the power, cpu and case fan all power up as expected. there aren't any beep codes interestingly enough. not sure what audio there is within the case. what should i be checking for?
  11. D

    10 seconds and all is well... then kaput..

    this is the 3rd machine i've built - the problem isthat the other two were 4 and 7 years ago! so i never remember what i did well/badly last time (well a little bit!). the problem: newly built machine boots fine and shows CPU, memory, hard drive, DVD drives accurately. i can enter the...
Back
Top