• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by devilchrist

  1. D

    Klipsch Promedia 5.1's - Amp repair

    mine was making the buzzing noise. took the amp out and sure enough the BASH board/chip was making a high pitch, hissing noise. so i wiggled the whole board a bit.. and bam.. fixed... haha.. ghetto as fix but hey it works for now. I'll replace the whole bash board once it breaks for good...
  2. D

    I'm lost on this Ausu P5K's instability (random freezing)

    I've just about ran every single torture test, stress test, graphics test... etc and all of them passed without a hitch for 48 hours.. But I'm still having hanging issues. I've just replaced this MB from MSI that i F'ed up on the bios update and did a fresh Vista64 install. Even at stock...
  3. D

    Thermal Tape

    never thought that.. coo stuff.. I just use 15mil think 3m Thermal conductive tape
  4. D

    Visiontek HD3870 OC Edition

    thermally conductive tape is hard to find.. ebay is your best bet
  5. D

    FS: Nintendo Wii, LG L246WP 24 LCD, Asus Maximus II P45, 8800 GTS 512, Mtron SSD, N95

    i have that LG monitor.. it kicks ass.. plus it's NOT a TN pos panel
  6. D

    FS: H2o cooling Rads, fans, tubing and fittings.

    how are these rads compared to other rads from swiftech and black ice?
  7. D

    is a mcr220 enough for cpu and video?

    You can look at my sig of what setup I have. I'm thinking of adding another mcr220, but i dont' think it will drop the temps all that much
  8. D

    Leaks

    Here's a tip about O-ring sealing 1. DO NOT OVER TIGHTEN 2. DO NOT OVER TIGHTEN 3. DO NOT OVER TIGHTEN 4. use a form of lubricant for surfaces that touch the O-ring (water will do) most problem with O-ring seal has to do with overtightening and deforming the O-ring. your barbs should...
  9. D

    is a mcr220 enough for cpu and video?

    only reason thermo chill is good is because is 2X thick as mcr320.. I bet 2 MCR20's stacked on top of one another would just as good if not better.
  10. D

    Prime95 Blend or Large FFT's causes PC to reboot??

    if all your sticks are showing same type of behavior, seems to me it's either the MB or ram timing settings. what do you have your ram timing set at? I had similar problems where auto mobo ram timing settings was not compaitble with Gskill's, i had to manually set. another is that you...
  11. D

    Fake Yate Loon Fans?

    All 6 of my yate loon from Petra make wining noise at 60%. they need at least 65% to be quite. One of the 6 of the petra's fan is not balanced so it is louder than all others. Personally. I think it's quality control issue. J-T might have gotten a bad production run order and petra...
  12. D

    DDR800 or DDR1066 when OCing an E8400?

    get the 4gb Gskill ddr1000 set,, you won't be disapointed
  13. D

    Cool both side of the PCB around mosfet to get more OC!

    Well when I just had ram sinks on my 8800GT, I was getting artifacts right away with anything over 750/1850. but I found that back of the PBC got pretty hot around the mosfets. So I put a large piece of 3M thermal adheasive tape and heat sinks and was able to get another 39mhz off the core and...
  14. D

    Recommend places to buy my water cooling stuff?

    newegg's got unbeatable prices on swiftech stuff if they have it in stock, i just check nothing left.. i suggest jab-tech or petrastech both great shops to order from
  15. D

    Remove/reinstall TRUE 120 without removing motherboard?

    use a low tac double sided foam tape. Taht's what comes wit my apogee GT back plate. it has just enough tac to stay on the mobo. when I had air tower cooler I had the same problem so I cut a square on the mb tray so I have rear access to hold the bracket.
See more
Back
Top