Here is my build: PC Hound - Build a PC in Seconds
For voltages (pulled from HWiNFO64):
12v: 12.288v
5v: 5.040v
3v: 3.328v
Also, the XMP profile on my RAM ups the following voltages. These are the ones I think are tripping the overvoltage light:
VCCSA: 1.248v
CPU I/O: 1.264
DIMM: 1.36...
Hey man...thanks for the reply. I think you are right about it being an indication of overvoltage protection. After doing more research I found others with the same problem. Apparently it turns on any time the voltage to the DDR4 DIMMs goes above 1.2v. I have 3200mhz RAM and had to bump up...
So after some troubleshooting I noticed that it only comes on when I have XMP enabled. I have 3200mhz DDR4 installed and when I run it at that speed the light is on. When I run it at the motherboard's default 2133mhz the light goes out. Must be a voltage thing. Weird thing is my system was...
Hey guys...I recently built a new rig and after a few hours a red light illuminated on the motherboard. The manual and Google don't seem to have anything about the specific light in question. It is one of two lights that look like battery symbols with +/- symbols. The one just above it is not...